DC DC Converter
|
Compact and Accurate Isolated System-Monitoring Solution for Automated Distribution and Sub-Station Applications Maxim Integrated today expands the MAXSafe Technology line with the MAX22530, an isolated, field-side self-powered 12-bit system monitor. Featuring 4 channels, the MAX22530 provides isolated system monitoring to improve accuracy 50x and to reduce solution size by 40 percent by integrating five components into a single IC. Automation system designers… |
|
250W DC/DC Resonant Converter to Speed up Efficient Power-Conversion in Industrial Applications using MasterGaN1 STMicroelectronics’ EVLMG1-250WLLC is a 250W DC/DC resonant converter that is suitable for industrial applications using MasterGaN1. The device comes with a 100mm x 60mm board outline and 35mm maximum component height, provides a 24V/10A output, and achieves maximum efficiency above 94%. The EVLMG1-250WLLC reference design … |
|
New 60V Inverting Step-down DC-DC Converters to Reduce Board Space and Minimize Energy Usage in IoT Devices Maxim Integrated has released new 60V inverting DC-DC converters, MAX17577 and MAX17578 with integrated level shifters, to save up to 72% of board space by reducing the component count by half while using 35% less energy than the closest competitive solutions. Both the ICs reduce size, heat, and cost while simplifying the design of negative output voltage rails… |
|
Single-Ended Primary Inductor (SEPIC) Converter Design with XL6009 In the field of DC-DC Converters, A single-ended primary-inductor converter or SEPIC converter is a type of converter that uses a boost type control topology to step up or step down the input voltage. After reading this, the first question that will come to your mind would be, is it like a glorified Classic Buck-Boost Converter? The answer is yes and no. A classic buck-… |
|
Radiation-Hardened DC to DC Power Converters with COTS Technology to Maximize System Performance and Reliability in Space Applications Microchip’s SA50-120 series is the family of space-qualified COTS-based radiation-hardened DC to DC power converters that help minimize risk and lower development costs in space applications. Offering eight million hours Mean Time Between Failure (MTBF) and up to 87% efficiency, the SA50-120 power converters maximize system performance and reliability. … |
|
500W Step-Down DC/DC Buck Converters in 1/16 Brick Pinout Package for Increased Efficiency in Industrial and Portable Battery-Powered Applications TDKCorporation has introduced a new compact and efficient i7A series of 33A 500W rated non-isolated DC/DC converters in a 1/16th brick pinout package for industrial and battery-powered applications. These new converters come with an output adjustment of 3.3V to 24V and can accept a wide range input voltage of 18 to 60V. The devices can be used to derive additional high-power… |
|
How to Design a Push Pull Converter – Basic Theory, Construction, and Demonstration When it comes to working with power electronics, a DC-DC converter topology becomes very crucial for practical designs. There are mainly two types of major DC-DC conversion topologies available in power electronics, namely, the switching converter and the Linear converter. Now from the law of conservation of energy, we know that energy cannot be… |
|
Ruggedized 60W DC/DC Converter for Railways and Other Transportation Applications The Traco power has introduced the TEN 60WIR, a ruggedized 60 Watt, wide 4:1 input voltage range (9–36, 18–75, 36–160 VDC) DC/DC converter series with a specially designed preassembled heatsink. The railway approved converter comes in a 2x1 metal package and provides increased resistance against electromagnetic interference, shock/vibration, and thermal shock. … |
|
New DC/DC Buck-Boost Converter with Low Quiescent Current can Extend Battery Life by 50% Texas Instruments has introduced the TPS63900, industry’s first DC/DC buck-boost converter that combines a programmable input current limit and integrated dynamic voltage scaling for extending battery life by 50%. The dynamic voltage scaling can deliver power while keeping the system at the minimum voltage required to operate efficiently, this maximizes battery life and… |
|
New Surface Mount DC-DC converters with Chiplet SiP technology for Reducing Package Size and Cost MORNSUN has introduced a new generation of DC-DC converters, the fixed input R4 series with a new packaging technology, that adopts the newest Chiplet SiP (System in Package) technology, which helps in reducing the dimension of the device by 80% and save costs for the customer. The newest Chiplet SiP technology delivers better performance and reliability when compared with… |
|
24V, 25A Half Brick 600W DC-DC converter for non-standard Voltage Accommodation TDK Corporation has introduced the PH600A280-24 DC-DC converter as an extension to the PH-A280 series of 200 to 425V DC input power modules from 50 to 600W. Rated at 24V 25A, PH600A280-24 has been designed to provide a wide 14.4 to 28.8V adjustment range to accommodate non-standard voltages. The device delivers an efficiency of 93% and can operate at full load with -40°C to… |
|
Surface Mount, Non-Isolated Dc-Dc Converter Offers Extreme Efficiency at a Low Cost CUI Inc announced the addition of its first four contact, surface mount, non-isolated converter to its dc-dc converter line. The ultra-thin VXO78-500-M DC-DC Converter features a 500mA output current, no-load input current as low as 0.2mA and a wide -40 to +85°C temperature range. This regulated dc-dc converter offers a wide 4.75 to 36 Vdc input voltage range, short-… |