A new kind of maker display is turning up on desk dashboards: the RLCD. It looks almost like e-ink, it is black and white, and it has no backlight, yet it updates fast enough to show a ticking clock. GreatScott! put one on his bench and measured how it compares with e-ink, and the results answer the question many makers are now searching for: RLCD or e-ink, which one should go in your next low-power project?
What is an RLCD?
RLCD stands for reflective LCD. It is a normal liquid crystal panel with the backlight removed and a reflective layer behind it, so ambient light passes through the liquid crystal, bounces back and forms the image. You read it like paper, it looks best in bright light, and it is unreadable in the dark unless you add a light.
The board most makers are buying is the Waveshare ESP32-S3-RLCD-4.2. It has a 4.2-inch, 300 x 400 black-and-white reflective panel driven by an ST7305 controller, on a board with an ESP32-S3 module with 16 MB flash and 8 MB PSRAM, dual microphones, an ES8311 audio codec, an SHTC3 temperature and humidity sensor, an RTC, a micro-SD slot and an 18650 battery holder. Waveshare lists it at 24.99 to 26.99 US dollars, depending on whether the battery is included. It works with Arduino and ESP-IDF, and there is an ESPHome example for Home Assistant dashboards.
RLCD vs e-ink: the key differences
Holding an image. E-ink is bistable: once drawn, the image stays with the power removed. An RLCD is still an LCD and needs power to keep the picture. GreatScott measured his RLCD board holding a static image with the ESP32 in deep sleep at about 10 mA from 5 V USB, or about 5 mA from a 3.7 V battery. He called it very good for an LCD but not even close to e-ink, and his comparison shows an e-ink board at roughly 110 microamps.
Refresh speed. This is where the RLCD wins. E-ink is slow and a full refresh flashes the screen. Even a good 4.2-inch e-paper module like Waveshare's 400 x 300 panel quotes about 0.4 seconds for a partial refresh. An RLCD redraws like an ordinary LCD, with no flashing, so counters, clocks and simple animations look natural.
Look and light. Both are reflective and readable in sunlight. Neither works in the dark without extra lighting. The Waveshare RLCD is pure black and white with only two grey levels, while many e-paper panels offer four grey levels or extra colours.
Price. The complete Waveshare RLCD board costs about the same as the bare 4.2-inch e-paper module, which Waveshare lists at 34.99 dollars. Another reflective option worth knowing is the Sharp Memory LCD, which keeps each pixel's state in in-pixel memory. Adafruit's 2.7-inch 400 x 240 breakout costs 44.95 dollars.
Which one should you buy?
Choose e-ink for things that change rarely and must run for months on a battery: shelf labels, weather stations that wake once an hour, door signs and e-readers.
Choose an RLCD for always-on dashboards that update often and are usually powered from USB or a large cell: desk clocks, Home Assistant panels, timers, sensor readouts and voice-assistant faces.
Choose a backlit LCD or OLED if you need colour, video or use in the dark.
If you want to get hands-on with the e-ink side first, our tutorial on interfacing a 1.54-inch e-paper display with Arduino UNO covers wiring and drawing text and images.
Image credit: GreatScott!, frames from the creator's video (RLCD board left, e-ink display right), cropped and resized.
About the author: Aswinth Raj is an electronics engineer and the editor of CircuitDigest, where he has published more than 150 hands-on projects and tutorials across Arduino, PIC, ESP32, Raspberry Pi and EV battery systems. He selects the stories on this page for what engineers and makers can actually learn or build from. Connect on LinkedIn
Add a comment
No account needed. Your comment appears once a moderator has reviewed it.