DC DC Converter

EZA2500W-32048 Bi-Directional DC-DC Converter Bi-Directional DC-DC Converter for Energy Storage Systems with Rechargeable Batteries

TDK Corporation has introduced the EZA2500W-32048 bi-directional DC-DC converter model to its EZA series, which is designed for an energy storage system with rechargeable batteries. The new 2500W converter is digitally controlled and the compact U1 power supply can change the conversion direction from high voltage DC sources, powered by solar or wind to 48Vdc batteries and…

40A SWIFT DC/DC Buck Converter 40A SWIFT DC/DC Buck Converter for High Current FPGA and Processor Power Supplies

Texas Instruments (TI) has introduced, a 40A SWIFT DC/DC buck converter TPS546D24A, which can deliver up to 160A of output current at 85°C ambient temperature. This new converter provides stackability of up to four ICs with higher efficiency than any other 40A DC/DC converter, this allows the engineers to design systems to deliver up to 160A of output current and also…

RPMH-0.5 DC-DC Switching Regulator Low Profile, 4.3V to 65V non-isolated SMD DC/DC Converter with 0.5A Output Current

RECOM has introduced the RPMH-0.5 series of non-isolated DC/DCs in a standard 12.19 x 12.19 x 3.75mm DOSA-compatible thermally-enhanced low profile LGA package. These devices can operate in the input range of 4.3 V to 65 V, this makes them suitable for devices operating on nominal 5, 12, 24 or 48V rails. With 0.5A output, five trimmable fixed outputs are available: 3.3V (+10…

TPSM53604 36V, 4A Buck Converter Module New 36V, 4A Buck Converter Module with Low Thermal Resistance in Compact QFN Package

Texas Instruments has announced a new DC/DC Buck Converter Module called TPSM53604, which is claimed to be the smallest 36V, 4A power module in a quad flat no-lead (QFN) package. The new DC/DC buck module’s small footprint (5mm x 5mm) allows the engineers to reduce the size of their power supply by 30% with reduced power loss up to 50% when compared with other similar…

RHV2 and RHV3 Unregulated DC/DC Converters Unregulated DC/DC Converters with 20kVDC Isolation

RCOM has introduced the RHV2 and RHV3 series of ultra-high isolation DC/DC converters with the output of 2W or 3W. The converters are designed with an ultra-high isolation rating of 12.5KVAC/one minute or 20kVDC/one second in a compact SIP16 package (45x15x17mm). Both the series of converters will have a nominal input of 5, 12 or 24V and a choice of 5, 12, 24 single or ±5 or…

RPX-2.5 Buck Regulator Power Modules from RECOM Buck Regulator Power Module with Integrated Shielded Inductor in Tiny QFN Package

RECOM added a new power module RPX-2.5 to its DC/DC converter portfolio. One of the smallest in its class of low profile QFN-packaged buck regulator power modules, the RPX-2.5 module is exceptional due to its flip-chip technology which increases power density and improves thermal management.

 

The RPX-2.5 buck…

Boost Converter Circuit using MC34063 Variable Output Voltage DC to DC Boost Converter using MC34063

In the previous tutorials, we demonstrated detailed design of 3.7V to 5V Boost Converter using MC34063 and 12V to 5V Buck Converter using MC34063. Today we will use the same MC34063 IC to build a DC to DC Boost Converter circuit which can convert small voltage like 3v to higher voltage upto 40v. So here MC34063 IC is used a Adjustable DC-DC Converter.

 …
Bi-Directional Logic Level converter using MOSFET Bi-Directional Logic Level converter using MOSFET

Back in the ENIAC era, computers were more analog in nature and used very few digital ICs. Today an average Joe’s computer works with multiple voltage levels, people who had seen the SMPS of a CPU would have noticed that your computer requires ±12V, +5V and +3.3V to operate. These voltage levels are very important for a computer; a specific voltage determines the state of…

Low Cost 2W DC/DC Converters in Open-frame SMD Low Cost 2W DC/DC Converters in Open-frame SMD

RECOM Power launched R2SX series of compact size 2W DC/DC converters ideal for applications such as bus isolation and a wide range of industrial automation control equipment. With low profile and compact footprint, the devices save ample space in PCB design. The R2SX is an open-frame 2W SMD isolated DC/DC converter with either (/H version) or 1kVDC/1 minute isolation options…

Flyback Converter Circuit Flyback Converter Circuit

In electronics, a regulator is a device or mechanism which can regulate the power output constantly. There are different kinds of regulators available in the power supply domain. But mainly, in the case of DC to DC conversion, there are two types of regulators available: Linear or Switching.

A linear regulator regulates the output using a resistive…

6-16A Non-isolated POL DC/DC Converter K12T Series New 6-16A Non-isolated POL DC/DC Converter K12T Series

MORNSUN introduced different current rated, complete protection, high efficient, non-isolated POL DC/DC converters K12T series. The K12T series DC/DC converter comes with 6A, 10A, 16A current ratings with different temperature derating and in a compact open frame SMD package. The output voltage of Converter can vary from 0.75V to  5.0V.  The K12T series DC/DC…

Low power DC/DC Converters for critical Medical Designs Low power DC/DC Converters for critical Medical Designs

The REM3.5E, REM5E and REM6E series of medical grade regulated DC/DC converters feature reinforced 250VAC continuous working isolation with >8mm creepage/clearance providing 2x MOPP. They qualify for medical B, BF and CF applications due to their low 1μA leakage current. The compact DIP24 package with industry standard pinout provides reinforced insulation of up to 10kVDC…

Have any questions?