ESP32 Motion Suit Lets a Gamer Play Resident Evil Hands-Free by Leaning and Stomping

User Avatar Aswinth Raj
Author
Share
A Gamer Wearing ESP32 Motion Suit Playing

Thumbsticks are the one part of a game controller nobody questions. A Reddit maker who posts as Dmy1703 decided to question them anyway. Over five weeks he has been building EXO-RIG, a homemade harness of ESP32 boards and motion sensors that lets him play Resident Evil on a PC by moving his body instead of his thumbs. In his latest test, even aiming is triggered with zero hands on the controller.

How the suit turns posture into button presses

The first version is refreshingly simple. A classic ESP32 dev board on the body reads an MPU6050 accelerometer and gyro over I2C and streams the motion data wirelessly to a second, smaller ESP32 that is plugged into the PC. That receiver shows up as a USB HID gamepad, so the game sees an ordinary controller and needs no extra driver or mapping software. In the early clip, the only cable on the body board is for 5 V power.

For the radio link he picked ESP-NOW, Espressif's connectionless peer-to-peer protocol, over Wi-Fi UDP or Bluetooth, because, in his words, minimal latency is non-negotiable for action games. ESP-NOW skips the access point and the TCP/IP stack entirely, so a small packet goes straight from one ESP32 to the other.

The control scheme he describes is surprisingly natural. Leaning forward walks the character. Sprinting, which normally needs a thumbstick click, first used a quick chest push and was later swapped for a light foot tap. Small tilts of the head swing the camera around, with an inverted axis so leaning back raises the crosshair.

The hard part is ignoring your own body

Anyone who has wired an IMU to a microcontroller knows the raw numbers are easy to read and hard to trust. People sway, breathe and shift their weight all the time, and none of that should make the character sprint. Dmy says most of the engineering went into telling deliberate impulses apart from normal movement, using dynamic threshold windows and acceleration deltas. On the camera side he added an adjustable deadzone cone and smoothed the response so a full 360 degree turn does not make the view jerk around.

The Week 5 update moves the project from bench wiring to a soldered, wearable suit worn over the shoulders, and adds hands-free aim triggering. The video shows him standing in front of the TV with the harness on while the game responds to his posture.

Why this matters beyond one game

Body-motion control has been tried many times, but this build is a clean example of the pattern makers can copy: a sensor node, a low-latency ESP-NOW link and a USB HID receiver that a PC game accepts as a normal gamepad without modification. Dmy says the next goal is to grow the posture mapping into a dedicated accessibility controller for gamers with limited upper-limb mobility, which is where removing the thumbsticks stops being a novelty and starts being useful.

If you want to try the sensor side yourself, our ESP32 air mouse using Bluetooth and an MPU6050 covers reading the IMU and sending motion to a PC as an input device.

Image credit: Dmy1703, frame from the maker's video, cropped and resized.

About the author: Aswinth Raj is an electronics engineer and the editor of CircuitDigest, where he has published more than 150 hands-on projects and tutorials across Arduino, PIC, ESP32, Raspberry Pi and EV battery systems. He selects the stories on this page for what engineers and makers can actually learn or build from. Connect on LinkedIn

Have any question related to this Article?

Add a comment

No account needed. Your comment appears once a moderator has reviewed it.

Never shown publicly.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.