To facilitate the fast-growing electronics industry, the semiconductor companies and component manufacturers constantly improve their designs and announce new products and components that are smaller, more efficient and powerful than the exiting ones. This section covers all the latest electronic components introduced in the market to enable design engineers to be aware about the latest options and helping them to keep their designs up-to-date for competing in the ever-evolving market.
TT Electronics announced two new surface mount device (SMD) power inductors: the HM66M series for use in high frequency power conversion systems and EMI filter applications, and the HM78M series for use in high density and high frequency DC/DC converter applications.
The TT…
Growing demand for information-rich driving experience, with low power consuming advanced design and visibility features is a key factor pushing the sales of display controller. As per Future Market Insights’ (FMI) recent analysis of the global display controllers market, sales of approximately 53 Million display controllers is anticipated to generate US$ 23 Billion…
The STMicroelectronics VIPer26K high-voltage converter integrates a 1050V avalanche-rugged N-channel power MOSFET that enables offline power supplies to combine a wide input-voltage range with the advantages of a simplified design
The extremely high voltage rating of the VIPer26K MOSFET eliminates the need…
Designers concerned about battery safety now have access to the most advanced battery protector with integrated fuel gauges from Maxim Integrated Products, Inc. The newest 1-cell, pack-side ICs in this portfolio are MAX17301 and MAX17311, which offer the most configurable settings for battery safety in the industry and uniquely allow fine tuning of voltage and current…
Murata introduced a new wire-wound common mode choke coil (CMCC) DLW32SH101XF2, which supports DCMR Class 3, fulfilling the IEC62228-3 requirement for use in CAN FD next-generation automotive networks.
In the automotive industry, technologies that control basic automobile behavior are…
Power Integrations announced CAPZero-3, the latest generation of the company’s energy-saving X-capacitor discharge ICs. Two-terminal CAPZero-3 ICs enable designers to easily meet IEC60335 safety approvals for major appliances, and cover all capacitor values from 100 nF to 6 µF.
IEC60335 is the discharge…
Infineon Technologies released the latest OPTIGA Trust M solution which will help manufacturers to increase the security of their devices while at the same time improving overall system performance. The OPTIGA Trust M is a single-chip solution which securely stores unique device credentials and allows devices to connect to the cloud up to ten times faster than software-only…
Renesas Electronics launched enhanced RX65N Cloud Kit featuring onboard Wi-Fi, environmental, light and inertial sensors, and support for Amazon FreeRTOS connected to Amazon Web Services (AWS). The Renesas’s kit provides embedded designers a fast start and secure connection to Amazon Web Services (AWS). To create IoT applications, the developers can utilise Renesas’s e2…
Nuvoton Technology Corporation releases a new line up of low power, robust security M261/M262/M263 series microcontroller designed for IoT applications. The new MCUs are based on Arm®Cortex®-M23 secure core for Armv8-M architecture and can run up to 64 MHz with 512 KB Flash in dual bank mode, with the support of Over-The-Air (OTA) Firmware update and 96 KB SRAM. The new…
Diodes Incorporated launched the AP3917 family of universal AC-DC, non-isolated buck (step-down) power switchers for low-power applications, such as small appliances and IoT endpoints powered by an offline supply. The switcher family includes the AP3917B (170mA nominal load), AP3917C (270mA), and AP3917D (370mA). The new family of switchers will fulfil the increasing need of…
Vishay Intertechnology launched new 60V TrenchFET Gen IV n-channel power MOSFET optimized for standard gate drives to deliver maximum on-resistance down to 4 mΩ at 10 V in the thermally enhanced 3.3 mm by 3.3 mm PowerPAK® 1212-8S package. The Vishay Siliconix SiSS22DN is designed to increase power density and efficiency in switching topologies featuring a low gate charge of…
Mouser Electronics is now stocking the i.MX 7ULP applications processors from NXP Semiconductors. Based on Fully Depleted Silicon on Insulator (FD-SOI) technology, the i.MX 7ULP devices support ultra-low-power performance and rich graphics for applications such as portable medical devices, smart home controls, wearable devices, gaming accessories, and portable printers…
