To facilitate the fast-growing electronics industry, the semiconductor companies and component manufacturers constantly improve their designs and announce new products and components that are smaller, more efficient and powerful than the exiting ones. This section covers all the latest electronic components introduced in the market to enable design engineers to be aware about the latest options and helping them to keep their designs up-to-date for competing in the ever-evolving market.
RECOM introduces the RAC03-K series 3W AC-DC converter modules, that can be used in a wide range of applications with its complete certifications for ITE and household standards.
Available in a compact 1in² footprint, these modules deliver an output power of 3 watts from -40°C to 60°C and 2 watts up to 80°C. Despite such a high…
Molex releases the MicroTPA 2.00mm Wire-to-Board and Wire-to-Wire Connector System, providing electrical and mechanical reliability in a high-temperature design that meets a diverse range of industry requirements. The connectors are ideal for the consumer and automotive markets needing a compact wire-to-board and wire-to-wire connector system, with a current rating up…
Diodes Incorporated announced the introduction of the 40V-rated DMTH4008LFDFWQ and 60V-rated DMTH6016LFDFWQ automotive-compliant MOSFETs packaged in DFN2020. These miniature MOSFETs occupy just 10% of the PCB area of larger packages, such as SOT223, enabling greater power density in DC-DC converters, LED backlighting, ADAS, and other ‘under-the-hood’…
ON Semiconductor announced the introduction of the ARX3A0 digital image sensor with 0.3 Mega-Pixel (MP) resolution in a 1:1 aspect ratio. With up to 360 frames per second (fps) capture rate it can perform like a global shutter in many conditions but with the size, performance and responsivity benefits of being a Back-Side Illuminated (BSI) rolling shutter…
Power Integrations announced that its 200 V Qspeed™ diodes – LQ10N200CQ and LQ20N200CQ – are now available with AEC-Q101 automotive qualification. Qspeed silicon diodes use merged-PIN technology to offer a unique balance of soft switching and low reverse recovery charge (Qrr). This results in low EMI and reduced output noise, which is especially important for in-…
CUI’s Motion Group announced the addition of a new series to its innovative AMT incremental encoder family to support larger motor shaft sizes from 9 mm to 15.875 mm (5/8 inch). The AMT13 series, based on CUI’s proprietary capacitive ASIC technology, brings the same high levels of durability, accuracy, and immunity to environmental particulates as current AMT…
Mouser Electronicsn is now stocking the PolarFire™ FPGA Video and Imaging Kit from Microsemi, a wholly owned subsidiary of Microchip Technology. Incorporating a non-volatile PolarFire field programmable gate array (FPGA), the kit enables high-performance evaluation of 4K image processing and rendering using dual-camera sensors, at 50 percent lower power than other SRAM FPGAs…
The new LYTSwitch-6 LED drivers provide up to 110 W output with no heatsinks and smallest footprint to suit smart-lighting and ballast applications
Power Integrations announced new additions to its LYTSwitch-6 family of safety-isolated LED-driver ICs for smart-lighting applications. The new ICs with…
Texas Instruments introduced a new switching battery charger integrated circuit (IC) that supports a termination current of 20 mA. Compared to competing devices, which typically support a termination current higher than 60 mA, TI’s BQ25619 enables 7% higher battery capacity and longer run time. The BQ25619 charger IC also delivers three-in-one boost converter integration and…
With the increasing numbers of electric vehicles, the demand for energy efficient charging solutions is also rising. Addressing the fast growing demand for Silicon Carbide (SiC) solutions in this field, Infineon Technologies launched two new EasyPACK modules of the 1200 V family. Both, Easy 1B and Easy 2B, integrate CoolSiC MOSFETs aiming not only at this…
USB Type-C has become increasingly popular, and with the introduction of Power Delivery (PD), it is now possible to charge more types of devices – and charge faster – than ever before. To remove the traditional complexity and high costs associated with implementing USB Type-C, Microchip announced two new solutions that simplify USB Type-C PD for a range of applications.…
XP Power has introduced two new series of wide input range chassis and DIN rail mount DC-DC converters, which can be installed into a wide variety of industrial and ITE applications.
The DTE06 and DTE10 DC-DC converters provide 6W and 10W of power output. Further offering an input range 4:1 and allowing a wide…
