16x2 LCD

Interfacing DHT11 with PIC16F877A Interfacing DHT11 with PIC16F877A for Temperature and Humidity Measurement

Temperature and Humidity measurement is often useful in many applications like Home Automation, Environment Monitoring, Weather station, etc. The most popularly used Temperature sensor next to LM35 is the DHT11, we have previously built many DHT11 Projects by interfacing it with Arduino, with Raspberry Pi and many other development boards. In this article, we will learn how…

GPS Interfacing with AVR Microcontroller GPS module (uBlox Neo 6M) Interfacing with AVR Microcontroller Atmega16/32

GPS modules are widely used in electronics applications to track the location based on longitude and latitude coordinates. Vehicle tracking system, GPS Clock, Accident Detection Alert System, traffic navigation, surveillance system etc. are few of the examples where GPS functionality is essential. GPS provides Altitude, Latitude, Longitude, UTC time…

Interfacing 16x2 LCD Display with TIVA C Series TM4C123G LaunchPad from Texas Instruments How to Interface a LCD Display with TIVA C Series TM4C123G LaunchPad from Texas Instruments

In the previous tutorial, we started with learning about TIVA TM4C Launchpad and how to control its Digital Input and Output pins using Energia IDE. Now, in this tutorial, we will learn about the interfacing of 16×2 Dot matrix LCD display with this board to display useful information and sensor data.

16x2 LCD Display is the most of us would…

Interfacing PCF8591 ADC with Arduino Interfacing a PCF8591 ADC/DAC Module with Arduino

Analog to digital conversion is a very important task in embedded electronics, as most of the sensors provide output as analog values and to feed them into microcontroller which only understand binary values, we have to convert them into Digital values. So to be able to process the analog data, microcontrollers need Analog to Digital Converter.

…
Interfacing APDS9960 RGB and Gesture Sensor with Arduino How to Use APDS9960 RGB and Gesture Sensor with Arduino

Today most of the phones come with gesture control feature to open or close any app, start music, attend calls etc. This is a very handy feature to save time and it also looks cool to control any device with gestures. We previously used accelerometer to build gesture controlled robot and gesture controlled Air mouse. But today we learn to interface a gesture sensor…

Interfacing MCP2515 CAN BUS Module with Arduino Arduino CAN Tutorial - Interfacing MCP2515 CAN BUS Module with Arduino

Today any average car consists of around 60 to 100 sensor units in it for sensing and exchanging information. With car manufactures constantly making their car more smarter with features like Autonomous driving, Airbag system, Tire Pressure monitoring, Cruise control system etc. this number is only expected to go high. Unlike other sensors, these sensors process critical…

DIY Arduino Digital Protractor using MPU6050 Gyroscope DIY Arduino Digital Protractor using MPU6050 Gyroscope

The MPU6050 is an IC 3-axis accelerometer and a 3-axis gyroscope combined into one unit. It also houses a temperature sensor and a DCM to perform a complex task. The MPU6050 is commonly used in building Drone and other remote robots like a self-balancing robot. In this project we will build a Digital Protractor using MPU6050 and Arduino. Here a servo…

Interfacing DHT11 Temperature & Humidity Sensor with STM32F103C8 Interfacing DHT11 Temperature & Humidity Sensor with STM32F103C8

DHT11 is a Temperature and humidity sensor which as the name implies is used to measure the atmospheric temperature and humidity in a particular environment or in a confined closed space. The sensor is commonly used in monitoring environmental parameters in many applications like Agriculture, Food Industries, Hospitals, Automobile, Weather Stations etc.

…
Interfacing BH1750 Ambient Light Sensor with Arduino How to Use BH1750 Ambient Light Sensor with Arduino

When you take your phone in sunshine or in high lighting, then it automatically adjusts the brightness according to the lighting conditions. Most of the display devices now a days, whether it’s a TV or mobile phone, have the Ambient Light Sensor inside to adjust the brightness automatically. Today in this tutorial, we will use one such sensor BH1750 Light Sensor Module…

RS-485 MODBUS Serial Communication with Arduino as Master RS-485 MODBUS Serial Communication with Arduino as Master

In the previous tutorial we learned about Modbus RS-485 Serial Communication with Arduino as Slave. In continuation with that article today Arduino will be used MODBUS Master and communicate with MODBUS slave. Here MODBUS Slave Software installed computer will be used as MODBUS Master. So, let’s begin by a short introduction about the RS-485 and Modbus.

…
IoT based Biometric Attendance system using Arduino and Thingsboard IoT Based Biometric Attendance system using Arduino and Thingsboard

Few years back if you were to tell someone that the Geyser and bedroom lights in your home are connected to internet, they would be baffled and might even criticize it as over-engineered products. But today with the advent of IoT, Smart cities etc the idea no longer sounds strange, we have devices around us that have become smarter by being able to communicate with the…

Interfacing GT511C3 Finger Print Sensor with Arduino Interfacing GT511C3 Finger Print Sensor (FPS) with Arduino

Biometrics has been used as a reliable authentication system for a long time now. Today there exist complex biometric systems which can identify a person by his heart beat rhythm or even by his DNA. Other feasible methods include voice recognition, Face recognition, Iris scanning and Finger print Scanning. Out of which the finger print recognition is the most widely used…

Have any questions?