ESP32-S31 vs ESP32-S3: What Changes and Which to Pick Now That Arduino Supports the S31

User Avatar Aswinth Raj
Author
Share
Waveshare ESP32-S31 Touch LCD 4 3C Board

The ESP32-S31 is now turning up on boards makers can buy. Waveshare has just released the ESP32-S31-Touch-LCD-4.3C, an S31 version of its popular ESP32-S3 4.3-inch touch display kit, and on 19 November Espressif released Arduino-ESP32 4.0.0, the first stable Arduino core release that supports the S31. So the obvious question is: should your next project use the ESP32-S31 or stay on the ESP32-S3? Here is what actually changes.

What is the ESP32-S31?

The ESP32-S31 is Espressif's new high-end wireless microcontroller, which entered mass production in July 2026. Despite the name, it is not an S3 with a small bump. It moves from Xtensa to RISC-V cores, from Wi-Fi 4 to Wi-Fi 6, and adds a Thread/Zigbee radio, Bluetooth Classic and Gigabit Ethernet.

ESP32-S31 vs ESP32-S3 at a glance

  • CPU: S31 has two 32-bit RISC-V cores at up to 320 MHz plus a 40 MHz low-power RISC-V core. S3 has two Xtensa LX7 cores at up to 240 MHz plus an ultra-low-power co-processor.
  • Performance: Espressif quotes 2,195 CoreMark for the S31 at 320 MHz. One S31 core has a 128-bit data path with SIMD instructions for AI and signal processing; the S3 has its own vector instructions.
  • Memory: both have 512 KB of internal SRAM. The S31 currently comes with 16 MB or 32 MB of PSRAM inside the package, on a 250 MHz 8-bit DDR bus, with flash and PSRAM accessed at the same time. Common S3 modules come with 2 or 8 MB of PSRAM.
  • Wi-Fi: S31 has 2.4 GHz Wi-Fi 6 (802.11ax, 20 MHz) with OFDMA and MU-MIMO. S3 has 2.4 GHz Wi-Fi 4 (802.11n). Neither supports 5 GHz.
  • Bluetooth: S31 has Bluetooth 5.4 LE with LE Audio, plus Bluetooth Classic. S3 has Bluetooth 5 LE only, with no Classic.
  • Thread and Zigbee: S31 has an 802.15.4 radio. S3 does not.
  • Wired: S31 adds a Gigabit Ethernet MAC, high-speed USB 2.0 OTG (480 Mbit/s) and CAN. S3 has full-speed USB OTG (12 Mbit/s) and CAN, with no Ethernet MAC.
  • I/O: S31 has 60 GPIOs against 45 on the S3, plus a JPEG codec, pixel-processing accelerator, DVP camera input and an RGB LCD interface up to 24 bits.
  • MMU: the S31 has an Sv32 memory-management unit, which is unusual in a microcontroller and opens the door to community experiments with full operating systems.

What the new display board shows

Waveshare's own comparison is a useful real-world check. The S31 board keeps the 4.3-inch 800 x 480 touch panel but doubles PSRAM to 16 MB, and it adds a USB host connector, CAN FD and RS485, a 7 to 36 V input and battery support, priced from 45.99 US dollars on Waveshare's store. It also shows the catch: Waveshare currently provides ESP-IDF 6.1 examples only, while the S3 version ships with both Arduino and ESP-IDF examples. The new Arduino-ESP32 4.0.0 core, built on ESP-IDF 6.1.1, should close that gap over time, but board-specific Arduino examples and third-party libraries will take a while to catch up.

Which one should you pick?

Stay with the ESP32-S3 if you rely on Arduino libraries, existing LVGL display or camera examples, or a cheap module that has years of community answers behind it. For most dashboards, cameras and sensor projects it is still the safe and cheaper choice, and the S3 itself is not going away.

Choose the ESP32-S31 if you need something the S3 simply cannot do: a Matter or Thread border router or Zigbee hub on one chip, Bluetooth Classic audio such as A2DP speakers, wired Gigabit Ethernet, fast USB, or more memory for a heavy GUI or on-device AI. Arduino support is now official in core 4.0.0, but check that the specific libraries you depend on build for the RISC-V S31 before you commit, because the ecosystem is weeks old, not years.

For another display question makers are asking right now, see our RLCD vs e-ink guide for ESP32 projects.

Image credit: Waveshare, product photo of the ESP32-S31-Touch-LCD-4.3C, cropped and resized.

About the author: Aswinth Raj is an electronics engineer and the editor of CircuitDigest, where he has published more than 150 hands-on projects and tutorials across Arduino, PIC, ESP32, Raspberry Pi and EV battery systems. He selects the stories on this page for what engineers and makers can actually learn or build from. Connect on LinkedIn

Have any question related to this Article?

Add a comment

No account needed. Your comment appears once a moderator has reviewed it.

Never shown publicly.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.