Six-Screen LED Cube Where 24,576 LEDs React to Music, All Driven by a Raspberry Pi CM4

User Avatar Aswinth Raj
Author
Share
Six-Screen LED Cube Reacting To Music Visualisations

Search for "LED cube" and you mostly find voxel cubes: a few hundred LEDs hanging in a 3D grid. Maker Ross Harvey built the other kind. His Lucent Cube has a full 64 x 64 RGB LED panel on each of its six faces, 24,576 LEDs in all, and it wraps one continuous animation around every side, reacts to sound, plays games and streams music visualisations. He has now published a full guide to how it is built, and his launch video has passed 220,000 views.

What is inside

  • Six HUB75 panels, 64 x 64 pixels at about 2.5 mm pitch, each 160 mm square
  • Cell-cast acrylic diffusers on every face, which turn a grid of bright dots into a smooth picture at the cost of about 15% of the light
  • A Raspberry Pi Compute Module 4 on a custom HUB75 driver and carrier board (a CM5 with a fan also works)
  • A custom power and boost board fed by a 2S lithium-ion pack, because six panels at full brightness can pull tens of amps at 5 V
  • Two speakers and a microphone for audio-reactive effects, plus motion sensing
  • A 3D-printed internal skeleton that holds the panels square, with a pogo-pin power port for charging

The hard part

Buying LED panels is easy. Feeding them is not. All six faces have to refresh in sync, or the picture tears at the edges where they meet. The cube uses the open-source rpi-rgb-led-matrix library, and Harvey notes that PWM-type panels, now supported by the library, give a higher refresh rate and less flicker. The software projects animations onto a sphere and maps them across the faces so they read as one canvas, with several view modes that react to how the cube is turned. The guide ends with the tricky final fold, where six finished faces close into one sealed cube.

Can you build one?

He designed his own printed parts and circuit boards, but he says the same result is possible with off-the-shelf panel mounts and a standard Raspberry Pi with a HUB75 controller HAT. He is also turning the design into a finished product in three sizes with app control and home-automation support; the site currently takes sign-ups rather than orders, with no price given. For a smaller take on the idea, see this 9x9x9 voxel LED cube with an Arduino Nano, or this LED matrix display project for ESP32 and Raspberry Pi.

Image credit: Ross Harvey / Lucent Cube, from lucentcube.com, cropped and resized.

About the author: Aswinth Raj is an electronics engineer and the editor of CircuitDigest, where he has published more than 150 hands-on projects and tutorials across Arduino, PIC, ESP32, Raspberry Pi and EV battery systems. He selects the stories on this page for what engineers and makers can actually learn or build from. Connect on LinkedIn

Have any question related to this Article?

Add a comment

No account needed. Your comment appears once a moderator has reviewed it.

Never shown publicly.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.