Automotive
|
High-Current DC-DC Buck Converters with Optimized BoM Cost and Footprint for High Current Automotive Applications Dialog Semiconductor has released a new line of highly efficient, high-current, automotive-grade, step-down DC-DC (Buck) converters. The family of highly integrated DA913X-A devices ensures a low system BoM cost and reduced solution footprint as these require just a few external components, unlike the competing solutions that are already in the market. … |
|
Tantalum Chip Capacitors in Miniature 0603 and 0805 Packages for Automotive Applications AVX Corporation has introduced the new F98-AJ6 series capacitors in a miniature 0603 and 0805 chip sizes with maximum heights of just 1.0mm and 0.80±0.10mm. The new series of capacitors are high-CV resin-molded, surface-mount tantalum chip-type capacitors that were designed especially for automotive electronics applications. The devices include… |
|
High-Performance Single Axis MEMS Capacitive Accelerometers for Automotive, Industrial, and Robotics Applications Silicon Designs Inc. has released high-performance single-axis MEMS capacitive accelerometers to support zero-to-medium frequency automotive, industrial vibration monitoring, and robotics instrumentation applications. The Model 2276 Series is available in eight standard ranges from ±2 g to ±400 g and combines an integrated low-noise, nitrogen-damped, fully calibrated MEMS… |
|
High Efficiency 42V Dual Synchronous Controller with Low Quiescent Current for Always-On Automotive Applications The Renesas Electronics Corporation has introduced a new pair of 42V dual synchronous controller that is designed with the lowest quiescent current of 6µA and integrated 2A source/3A sink MOSFET drivers that provide primary power stage solutions for the Renesas R-Car H3 and R-Car M3 SoCs. The ISL78264 dual sync buck controller… |
|
Single Pair Ethernet Physical Layer Transceiver with TC10 Sleep Standard for Compact Automotive Applications Microchip Technology introduced the LAN8770, an OPEN Alliance TC10 sleep standard Ethernet Physical layer transceiver (PHY) that has four-time lower sleep current (15 µA) than other available devices. The IEEE 802.3bw-2015 specification compliant LAN8770 is a compact, cost-effective, single-port 100BASE-T1 Ethernet PHY packed in a 5x5 mm or 6x6mm wettable-flanks QFN.… |
|
Automotive Compliant Dual PNP Transistors for Controlling Matrix LED Light Clusters Diodes Incorporated has introduced the automotive compliant ZXTP56060FDBQ and ZXTP56020FDBQ dual PNP transistor that provides OEMs with a highly efficient solution for controlling matrix LED light clusters. These new transistors were designed to address the demand for the need of dense and highly power-optimized transistors for shunting LEDs in matrix lighting and sweeping… |
|
Flyback Switching IC with 30V to 550V DC Input for Automotive EV Applications Power Integrations has introduced the InnoSwitch3-AQ, an AEC-Q100- qualified switcher with integrated 750V MOSFET and secondary-side sensing, designed especially for automotive EV applications, such as traction inverter, OBC (on-board charger), EMS (energy management DC/DC bus converters), and BMS (battery management systems). The high-speed… |
|
Constant Current 2 Phase Automotive Stepper Motor Driver IC with Sine Wave Current Output Toshiba Electronic Devices & Storage Corporation has introduced the “TB9120AFTG” a 7 V to 18 V constant current 2 phase stepping motor driver for automotive applications. The new IC gives out a sine-wave current with the help of a simple clock input interface, this eliminates the need for an advanced functional MCU or dedicated software. The… |
|
Automotive Compliant 3.5A Synchronous Buck Converters for Point of Load (POL) Applications Diodes Incorporated has introduced AP64350Q, AP64351Q, and AP64352Q, a series of automotive-compliant, 3.5A, Synchronous buck converters that combine a low quiescent current with a wide input voltage range of 3.8V to 40V point of load (POL) applications. The AP6435xQ provides high-efficiency step-down DC-DC conversion with the help of the fully integrated 75mΩ high-side… |
|
Flexible And Cost-Effective Automotive Pressure Sensor for Electric and Hybrid Vehicle HVAC Applications The Renesas Electronics Corporation has introduced the ZSSC4132- an automotive pressure sensor solution with an integrated certified LINv2.2a interface. The single-package sensor signal conditioner (SSC) delivers best-in-class performance, increased design flexibility, and cost-efficiency in a compact form factor for HVAC applications used in plug-in hybrid electric vehicles… |
|
Automotive Grade Monolithic Hall Effect Sensor for Three Dimensional Contactless Sensing Melexis announces the MLX90395 Triaxis Magnetometer Node, an automotive-grade (AEC-Q100) monolithic Hall effect sensor that provides contactless sensing in three dimensions. The sensor is also available in a dual-die version which provides redundancy for demanding scenarios such as gear level position sensing in automotive applications. The Triaxis technology leads to the… |
|
New Electronic Control Unit (ECU) Test System from NI for Flexible and Low-Cost Testing of Automotive ECUs As the automobiles are transitioning from mechanical to electrical, the use of ECUs (electronic control units) has increased to a higher percentage. The ECUs in the electric vehicles act as the brainpower of the vehicle and are responsible for all the most important features such as safety with the help of ADAS, precise engine control, connectivity, efficiency, and comfort.… |
