To facilitate the fast-growing electronics industry, the semiconductor companies and component manufacturers constantly improve their designs and announce new products and components that are smaller, more efficient and powerful than the exiting ones. This section covers all the latest electronic components introduced in the market to enable design engineers to be aware about the latest options and helping them to keep their designs up-to-date for competing in the ever-evolving market.
Diode Incorporated introduced the AL5816Q automotive-compliant linear LED controller for Automotive LED lighting. The AL5816Q is a 5-terminal adjustable constant current linear LED controller offering excellent temperature stability and current capability. With its low 200mV current sense FB voltage, it controls the regulation of LED current with minimum power dissipation…
Mouser Electronics is now stocking the STEVAL-BCN002V1B BlueNRG sensor node development kit from STMicroelectronics. The fully equipped evaluation kit includes the BlueNRG-Tile multi-sensor board and STEVAL-BCN002V1D programming board for the development of Internet of Things (IoT) applications.
The ST STEVAL-…
Optimized for best conduction and switching performance in soft-switching circuits, STMicroelectronics’ STGWA40IH65DF and STGWA50IH65DF 650V STPOWER™ IGBTs increase the energy efficiency of resonant converters in the 16kHz-60kHz switching-frequency range.
Extending ST’s trench field-stop (TFS) IGBTs for soft-…
Recom launched SMD and Pin Versions of the REM3.5E, REM5E and REM6E series of medical-grade regulated DC/DC converters. These converters were recently released by RECOM where REM3.5E is 3.5W, REM5E is 5W and REM6E is 6W medical grade DC/DC modules. They offer reinforced 250VAC continuous working isolation with >8mm creepage/clearance providing 2xMOPP and insulation…
Diodes Incorporated introduced new PI7C1401 quad port expander with small size and in a 56-ZF (TQFN) package measuring just 5mm x 11mm at 0.5mm pitch, allowing it to be surface-mounted to the underside of a PCB and close to the physical interfaces. PI7C1401 comes with four low-speed ports that can be aggregated into a single channel and by combining multiple quad port…
Vishay Intertechnology released a new series of automotive grade AC line rated ceramic disc capacitors with its firs AEC-Q200 qualification for ClassX1(760 VAC)/Y1(500 VAC) applications in conformity with IEC 60384-14.4. It also added two new components offering capacitance of 6.8 nF and 10 nF, respectively to its existing AY2 Series .The Disc of AY1 Series offers a…
Melexis released MLX90374 which is fourth device to its third generation of Triaxis Hall sensors with multiple output options and two independently configurable output stages. The primary output can encode position data in either SENT or PWM, the second output provides position data encoded as a 12-bit PWM signal. The consumers can now make even better use of our advanced 3D…
The STMicroelectronics LPS33W water-resistant MEMS pressure sensor combines chemical compatibility, stability, and accuracy for use in a wide range of applications such as fitness trackers and other wearables, vacuum cleaners, and general-purpose industrial sensing.
Protected by a viscous potting gel…
Toshiba Electronics released two new series TCR5BM and TCR8BM small surface mount LDO regulators for applications in the power supply of mobile devices, imaging and audio visual products. Both series offer excellent low dropout voltage and high ripple rejection ratio up to 98dB with fast load response characteristics ensure stable operation when the operation mode changes.…
Texas Instruments expanded its broad portfolio of over 500 linear regulators by introducing a first-of-its-kind smart AC/DC linear regulator. With 75 percent higher efficiency and two times the power density of other linear regulators, this device achieves the best balance between high efficiency and ultra-low noise while shrinking power-supply size. The fully integrated…
Designers of portable Li-ion battery-powered electronics now have a simplified and more flexible way to add a USB Type-C (USB-C) charging system to their products with the MAX77860 3A switch-mode charger from Maxim Integrated. This USB-C buck charger provides the industry’s first integrated USB-C port controller and charger to eliminate the need for a separate host…
Mouser Electronics is now stocking the STM32WB wireless microcontrollers from STMicroelectronics (ST). Supporting Bluetooth® 5.0, ZigBee 3.0, and OpenThread connectivity, the dual-core STM32WB microcontrollers are ideal for a broad range of IoT applications, including wearable devices, home security products, smart lighting, fitness and medical devices, industrial…
