Explore all electronics projects from simple electronics projects to high-end MCU and IoT projects. These projects belong to a wide range of categories such as Embedded, Power Electronics, Analog, Digital Electronics, Audio and Internet of Things. The below list of electronics projects contains 1200+ projects come under various electronics engineering domains.
If you want more projects, you can also check out our collection at Arduino IoT Projects | Arduino Robotics Projects | Arduino AI Projects | Arduino Home Automation Projects | Raspberry Pi Projects | ESP32 Projects
Hey everyone, in this tutorial we are going to interface a Liquid Crystal Display (LCD) module with the Raspberry Pi Pico using Micropython. By the end of this tutorial, you will be able to display strings, characters on the LCD using Micropython. Before beginning this tutorial, I'm presuming that you've already followed our tutorial series on Raspberry Pi Pico.…
In 1980, Intel developed the first Microcontroller (8051) with Harvard Architecture 8051 and since then Microcontrollers brought a revolution in Electronics and embedded industry. And with the technological advancement over the time, now we have many more efficient and low power microcontrollers like AVR, PIC, ARM. These Microcontrollers are more capable and easy…
Waste management has become a pressing global issue as urbanization continues to grow. One innovative solution that addresses this challenge is a "Smart Dustbin". In this project, I will show you how to make a Smart Dustbin using Arduino, where the lid of the dustbin will automatically open when you approach with trash. Previously, we have…
Thermal printer is often referred as receipt printer. It is widely used in restaurants, ATM, shops and many other places where receipts or bill is required. It is a cost-effective solution and very handy to use from the user’s side as well as from the developer’s side. A thermal printer uses a special printing process which uses thermochromic paper or thermal paper for…
It is expected that by 2020 we will have 25 Billion devices connected to the internet. To give you an idea that is more than three times the population of earth today. With the concepts of IoT and Industry 4.0, Connected Vehicles and Smart Cities spreading rapidly, this is most likely to happen. We already have a handful of wireless protocols like BLE, Wi-Fi, Cellular etc,…
One of the cool projects I always wanted to build is an FM transmitter with a good range. I have always been fascinated by some of the applications of the transmitter, especially when I was younger and, like everyone else, spent most of my time imagining how cool it would be to have some of the equipment and devices used in spy movies. So recently, while going over one of my…
In this DIY project we are going to build a Simple Mobile Phone using Raspberry Pi, in which GSM Module is used to Make or answer the Call and send or read the SMS, and also this Raspberry Pi phone has Mic and Speaker to talk over this Phone. This project will also serve as a proper interfacing of GSM Module with Raspberry Pi, with all the Code…
PIC Microcontrollers are a powerful platform provided by microchip for embedded projects; its versatile nature has enabled it to find ways into many applications and is yet to grow a lot. If you have been following our PIC tutorials then you would have noticed we have already covered a wide range of tutorials on PIC microcontroller starting from the very basics. In…
In this blog, we will learn about how to interface a Passive Infrared sensor (PIR Sensor) or motion sensor with an Arduino. We will also learn about how this sensor works and different parts of it. So for more info, stay tuned.
The Components Used in this project are:-
Arduino Uno PIR Motion…
A mixer is a special type of electronic circuit that combines two signals (periodically repeating waveforms). Mixers find a lot of use in audio and RF systems and rarely used as simple analog ‘computers’. There are two types of Analog Audio Mixers - Additive Mixers and Multiplicative Mixers.
1. Additive Mixers
Like their name suggests, additive mixers simply add…
In this tutorial, we will learn to Guide you about how you can interface a heartbeat sensor with an Arduino to measure live-heartbeat of any person. We will be also interfacing an OLED display to the Arduino to show the real-time values on its screen.
Components required for this Project…
We are moving towards the World of Internet of Things (IoT), a technology which is going to play a very important role in the consumer and industrial electronics. Sending an Email from any Microcontroller or Embedded system is one of the very basic thing which is required in IoT. Here we create a demo IoT project where we use ESP8266 and MSP430 Launchpad…
