Checking the condition of one stretch of high-voltage line usually means a crew driving, hiking and climbing to reach it, or a planned outage to fit a sensor. Munich start-up Nomadic sends a drone instead. Its NOMAD lands on the live conductor, clamps on, stops its propellers and then charges itself from the line it is sitting on. On 17 November 2026 the company announced a $6 million (about EUR 5.5 million) seed round led by Foundamental to put more of them on the grid.
How a drone can charge from a power line
Current flowing through a conductor sets up a magnetic field around it. That is the same principle a clamp meter or a current transformer uses: wrap a magnetic core around the wire and the changing field induces a voltage in a winding on the core. The NOMAD closes such a core around the conductor after landing, so it harvests energy inductively without any electrical contact with the high-voltage line, and keeps its battery topped up around the clock. A separate current sensor around the conductor measures how much load the line is carrying.
What it measures
- Line current (load and fault events), continuously
- Conductor temperature, measured on the wire itself rather than estimated from the weather
- Vibration, including wind-induced vibration and galloping before it fatigues the conductor
Readings go out over a secure cellular link to Nomadic OS, which combines them with weather models, grid data and history. The main use is Dynamic Line Rating: working out how much current a line can safely carry right now, instead of using a fixed conservative rating, so operators can squeeze more renewable power through existing lines.
The numbers
- About 4 kg per drone
- Lands on lines up to 420 kV, the highest voltage in most European transmission grids, with no outage
- Docks in under five minutes, flown out by the operator's own drone pilots
- Works down to -25 degrees C
- More than 20,000 hours logged on live lines
- One drone covers roughly 25 km of line, against fixed sensors typically placed every 1 to 5 km
When a job is done, the core opens and the NOMAD takes off from the live conductor to the next span. NOMADs are in operation on German transmission and distribution grids and have been deployed in Norway and the US. Nomadic says the new money goes into bringing remote relocation into production with customers in 2027, more fleet deployments in Europe and the US, and its Munich team. The company was founded in 2024 at UC Berkeley by CEO Andreas Moldskred and CTO Lauritz Weil.
The hard part is the landing and take-off on a swaying, energised cable, done without switching the line off. You can see the landing and take-off in Nomadic's own NOMAD video.
Image credit: Nomadic, frame from the official NOMAD video, cropped and resized.
About the author: Aswinth Raj is an electronics engineer and the editor of CircuitDigest, where he has published more than 150 hands-on projects and tutorials across Arduino, PIC, ESP32, Raspberry Pi and EV battery systems. He selects the stories on this page for what engineers and makers can actually learn or build from. Connect on LinkedIn
Add a comment
No account needed. Your comment appears once a moderator has reviewed it.