GigaDevice GD32H7 Cortex-M7 MCUs Hit 750 MHz With EtherCAT and MIPI DSI for Robots

User Avatar Aswinth Raj
Author
Share
GigaDevice GD32H7 Cortex-M7 Microcontrollers For Industrial Robots

GigaDevice has launched a new generation of its GD32H7 Arm Cortex-M7 microcontrollers, split into four families aimed at robot joints, industrial displays, motion control and general automation. The GD32H78x parts run at 750 MHz and the GD32H77x parts at 600 MHz, with a top CoreMark score of 3,736.

Key specs

  • Core: Arm Cortex-M7, 600 MHz (GD32H77x) or 750 MHz (GD32H78x)
  • Memory: up to 9,728 KB Flash and 1,152 KB SRAM, including 640 KB of tightly coupled memory
  • GD32H77R: EtherCAT slave controller and two 100 Mbps Ethernet PHYs on one die, EnDat, BiSS-C and Tamagawa encoder support, a resolver-to-digital module, in a 9 x 9 mm BGA169
  • GD32H78D/77D: MIPI DSI display interface, graphics acceleration and audio for industrial HMIs
  • GD32H78E/77E: EtherCAT with distributed-clock sync cycles down to 62.5 us for multi-axis motion
  • GD32H789/779: general-purpose parts in packages from LQFP100 to BGA176
  • Temperature: -40 to +105 C

Who it suits

The GD32H77R is the most interesting part: putting EtherCAT and both PHYs inside a 9 mm package removes several chips from a humanoid robot joint or a compact servo drive. Samples are planned for January 2027 and mass production for April 2027. Pricing has not been announced.

Image credit: GigaDevice, press image cropped and resized.

About the author: Aswinth Raj is an electronics engineer and the editor of CircuitDigest, where he has published more than 150 hands-on projects and tutorials across Arduino, PIC, ESP32, Raspberry Pi and EV battery systems. He selects the stories on this page for what engineers and makers can actually learn or build from. Connect on LinkedIn

Have any question related to this Article?

Add a comment

No account needed. Your comment appears once a moderator has reviewed it.

Never shown publicly.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.