4 Tesla (40,000 Gauss) Automatic Magnetic Pulser

Diouffy's picture

Offline

Joined: May 02, 2020

Replies: 9
4 Tesla (40,000 Gauss) Automatic Magnetic Pulser
September 20, 2020 - 2:59pm
Hi
I don't understand the 120VAC supply connection. Does ground from a low voltage circuit be connected with ground/neutral of 120VAC? And one side of the power supply is 120VAC and the other is 12VDC. How is that?
Sourav Gupta's picture

Offline

Joined: Feb 12, 2018

Replies: 627

Provide the schematic or connection diagram.

Diouffy's picture

Offline

Joined: May 02, 2020

Replies: 9

Diouffy's picture

Offline

Joined: May 02, 2020

Replies: 9

I am unable to post the photo. check out online for ; 4 Tesla (40,000 Gauss) Automatic Magnetic Pulser

Sourav Gupta's picture

Offline

Joined: Feb 12, 2018

Replies: 627

The Circuit is bit confisuing in this term of ground and neutral connection. THere are two separate return path is shown with the same symbol. If you check the input AC denoted as Power it is a 120VAC input. The Ground symbol is showing neutral connection that is denoted as neutral. All of the connection out of the Low voltage circuit section is connected in neutral. Now the 12VDC 1A PSU that is denoted as P1 is providng the supply voltage of 12V to the low voltage circuit. Therefore, the low voltage circuit will use the 12VDC ground only. Hope this will help you to understand the circuit.