Wireless

BlueNRG-LP - Bluetooth LE 5.2-Certified, Bluetooth LE System-on-Chip New Programmable BLE System-on-Chip with Ultra-Low-Power Radio to Extend Battery Life in Consumer Applications

STMicroelectronics has introduced the BlueNRG-LP, a BLE 5.2-certified, Bluetooth LE System-on-Chip (SoC) that has been designed to increase communication range, raise throughput, strengthen security, and save power. Consuming a very low power of 3.4mA in receive mode and just 4.3mA while transmitting, the new ultra-low-power radio (BlueNRG- LP) can reduce the battery…

Program Arduino Wirelessly over Bluetooth How to Program Arduino Wirelessly over Bluetooth

Arduino Uno, the most popular microcontroller among electronics hobbyists and students and its pretty easy to get started with embedded systems using Arduino But one drawback of Arduino is that it needs to be connected to the computer using USB cable to upload the code as it has done have any onboard support for wireless communication. And sometimes, it is very difficult to…

Interfacing ESP32 SX1278 LoRa Module with ESP32 Interfacing SX1278 LoRa Module with ESP32

LoRa is a wireless Radio frequency technology introduced by a company called Semtech intended to be used to transmit bi-directional information to a long-distance without consuming much power. If you are new to LoRa, then learn about LoRa and LoRaWAN Technology and check LoRa interfacing with Arduino and Raspberry pi.

In…

IR Remote Decoder using Arduino IR Remote Decoder using Arduino

IR (Infrared) communication is simple, low-cost, and widely used wireless communication technology. IR light is somewhat similar to the visible light, except that the wavelength is slightly longer. This property of IR makes it undetectable to the human eye and perfect for wireless communication.

There are lot of applications where you need to decode…

Programming ESP32 Over-the-air (OTA) using Arduino IDE Programming ESP32 Over-the-air (OTA) using Arduino IDE

OTA (Over the Air) Programming is a feature of any WiFi-enabled microcontroller like ESP32 and ESP8266 that allows these devices to upgrade their firmware or software wirelessly without any physical access. This feature can be used to reprogram the devices that are fixed on a roof or any other place where connecting cable is difficult. Using OTA, you can send an update to…

Women Safety Device Using Arduino with GPS Tracking & Alerts Women Safety Device with GPS Tracking and Alerts Using Arduino

With all the technology available to us in recent times, it's not hard to build a safety device for women which will not only generate an emergency alarm but also send a message to your friends, family, or concerned person. Here we will build a band that can be worn by women, using which they can inform police or anyone, using SOS emergency SMS along with the current…

STEVAL IDB008V1M Evaluation Kit STEVAL IDB008V1M Evaluation Kit for High Performance Bluetooth 5.0 Applications

The STMicroelectronics STEVAL IDB008V1M Bluetooth Low Energy 5.0 (BLE) evaluation Kit increases the application development with modules featuring BlueNRG-2 Company’s second-generation BLE System-on-Chip (SoC). With the support of Bluetooth 5.0 Certification, the BlueNRG-2 SoC can possess enhanced security with LE Secure Connections, power-efficient privacy with Link Layer…

HART's Multi-Drop Network Mode Introduction to HART – Highway Addressable Remote Transducer Communication Protocol

The benefits of getting two machines (or components within them), to talk to one another have been an obvious one to Industrial automation and control experts, way before the Internet of Things (IoT) became mainstream. The values in a temperature sensor at the heart of a crankshaft sending measurements to control the motor drive relay etc. was clear, and one of the…

ON Semiconductors' QCS-AX2 Chipset Family New Family of QCS-AX2 Chipsets with 6GHz spectrum band for High throughput Wi-Fi 6E Applications

ON Semiconductors has announced the availability of samples of their new QCS-AX2 chipset family that supports the 6GHz spectrum band based on the enhanced Wi-Fi 6E standard. The QCS-AX2 series is built on an integrated baseband and RF (radio frequency) architecture that supports the most important features of Wi-Fi 6E such as orthogonal frequency-division multiple access (…

900MHz Vertical Pole Omni Antennas 900MHz Vertical Pole Omni Antennas for Rugged Industrial Applications and Extreme Environmental Conditions

KP Performance has introduced 900 MHz Omni antennas that are designed for 900 MHz ISM/licensed bands and for ensuring reliable links that are mission-critical in industrial applications. These antennas have an integral N-Female type connector that mounts through the wall of an equipment enclosure, it also features a dual U-bolt mast mounting kit, a heavy-duty steel bracket…

Backpack Computers to Track Wild Animals Fingertip Sized “Backpack” Computers with Wireless Networks for Precise Tracking of Tiny Wild Animals

A team of engineers, computer scientists, and biologists have developed ‘backpack’ computers to track tiny animals that divide their time between flying around in the sky and huddling together in caves and hollow trees. Aptly named ‘Broadly Applicable Tracking System or BATS’, the wireless network will enable researchers to keep a track of tiny wild animals like birds,…

8V97003 Wideband mmWave Synthesizer Wideband 18GHz RF and Microwave Synthesizer for 5G and Broadband Wireless Applications

The Renesas Electronics Corporation has introduced a next-generation wideband mmWave synthesizer to meet the customers’ demanding frequency range, phase noise, and output power requirement. The flagship 8V97003 has been designed with the industry’s high performance and unique features for 5G and broadband wireless applications.

The 8V97003 delivers…

Have any questions?