Communication

Introduction to LoRa and LoRaWAN: What is LoRa and How does it Work? Introduction to LoRa and LoRaWAN: What is LoRa and How Does It Work?

Communication is one of the most important parts of any IoT project. The ability of a thing to communicate with other “things” (a device cloud/server) is what gives the “thing” the right to attach the “internet” to its name. While tons of communication protocols exist, each of them lacks one thing or the other which made them “not totally suitable” for IoT applications…

LoRa with Raspberry Pi – Peer to Peer Communication with Arduino LoRa with Raspberry Pi – Peer to Peer Communication with ArduinoLoRa is getting increasingly popular with the advent of IoT, Connected Cars, M2M, Industry 4.0 etc. Because of its ability to communicate to long distances with very less power it is preferably used by designers to send/receive data from a battery powered Thing. We have already discussed the basics of LoRa and how to use LoRa with Arduino. Although the technology is originally intended for a LoRa…
Serial Communication Protocols Serial Communication Protocols

Before starting with Serial Communication Protocols, let’s break down the terminology into three parts. Communication is a very well-known terminology that involves the exchange of information between two or more mediums. In embedded systems, communication means the exchange of data between two microcontrollers in the form of bits. This exchange of data bits in a…

New Microwave Up and Downconverters with 24 GHz to 44 GHz Wideband and Compact Size Released By Analog Devices New Microwave Up and Downconverters with 24 GHz to 44 GHz Wideband and Compact Size released by Analog Devices

Analog Devices confirmed the release of two new Microwave Upconverter (ADMV1013) and Downconverter (ADMV1014) with a very wide frequency range covering from 25GHz to 44 GHz with 50 ohm match. Each Up and Downconverters are highly equipped and features in-phase (I) and quadrature-phase (Q) mixers. These ICs will have on-chip voltage variable attenuators, transmit PA driver (…

How to use I2C Communication in STM32 Microcontroller How to use I2C Communication in STM32 Microcontroller

In our previous tutorials, we have learned about SPI and I2C communication between two Arduino boards. In this tutorial we will replace one Arduino board with the Blue Pill board that is STM32F103C8 and will communicate with the Arduino board using I2C bus.

STM32 has more features than Arduino board. So it would be great to learn about communication…

Arduino I2C Tutorial: Communication between two Arduino Boards How to use I2C in Arduino: Communication between two Arduino Boards

In our previous tutorial learned about SPI communication in Arduino. Today we will learn about another Serial Communication Protocol: I2C (Inter Integrated Circuits). Comparing I2C with SPI, I2C has only two wires while SPI uses four, and I2C can have Multiple masters and slaves, while SPI can have only one master and multiple slaves. So there are more than one…

How to use SPI in Arduino: Communication between two Arduino Boards How to use SPI (Serial Peripheral Interface) in Arduino to Communication between two Arduino Boards

A Microcontroller uses many different protocols to communicate with various sensors and modules. There are many different types of communication protocols for wireless and wired communication, and the most commonly used communication technique is Serial Communication. Serial communication is the process of sending data one bit at a time, sequentially…

Circuit Switching and Packet Switching An Overview of Circuit Switching and Packet SwitchingWhat is switching?

In modern world, we are connected with everyone, either by internet or by a telephone connection. In this huge network, when a phone call is made, or when we access some website, the data get transferred from one network to the other network. Even to access a simple webpage, many computers (servers) are accessed to provide you the desired data you are…

Infineon is Launching High Speed Communication System Basis Chips having Speed up to 5 Mbit/s Infineon is Launching High Speed Communication System Basis Chips having Speed up to 5 Mbit/s

Recent developments in the automotive industry require increasingly faster communication capabilities. Originally, the CAN FD protocol was established for software updates during production and service events. Today, also the communication within the car and its connectivity to the outside world require an increased bandwidth and longer payload. For example, high-end front…

Introduction to Bit Banging: SPI communication in Arduino via Bit Banging Introduction to Bit Banging: SPI communication via Bit Banging

Communication Interfaces are one of the factors that are considered when selecting a microcontroller to be used for a project. The designer ensures that the microcontroller being selected has all the interfaces required to communicate with all the other components to be used for the product. The existence of some of these interfaces, like SPI and I2C on microcontrollers,…

I2C communication with MSP430 Launchpad I2C communication with MSP430 Launchpad

MSP430 is a powerful platform provided by Texas Instruments for embedded projects, its versatile nature has made it to find ways into many applications and the phase is still going. If you have been following our MSP430 tutorials then you would have noticed we have already covered wide a range of tutorials on this microcontroller starting from the very basics.…

RS232 serial communication RS232 Serial Communication Protocol: Basics, Working & Specifications

RS232 Communication Protocol represents one of the most successful and enduring standards in electronics history. Originally developed in 1962 by the Electronic Industries Association (EIA), RS232 defined the interface between Data Terminal Equipment (DTE) and Data Communication Equipment (DCE) for serial binary data interchange. While modern protocols like RS485,…

Have any questions?