High Temperature IHSR Inductor Offers Higher Current Density for Multi-Phase Power Supplies

News

ByStaff 0

High Temperature IHSR Inductor Offers Higher Current Density for Multi-Phase Power Supplies

Vishay Intertechnology released its first device in new IHSR series of high temperature commercial inductors. Designed for multi-phase, high current power supplies and filters in computer, industrial, and telecom applications, the Vishay Dale IHSR-4040DZ-51 can reduce DCR 50% over typical power inductors and a 20 % profile reduction over similar ferrite products. In addition, the inductor boasts an unprecedented standard DCR tolerance of 5 %, with 3 % available for more accurate current sensing.

 

With a frequency range up to 5 MHz, the IHSR-4040DZ-51 is optimized for energy storage in DC/DC converters and high current filtering up to the self-resonant frequency (SRF) of the inductor. The intended applications of the device include notebooks, desktop PCs, and servers; low profile, high current power supplies and filters; and DC/DC converters for distributed power systems.

 

The IHSR-4040DZ-51’s low typical DCR of 0.520 mΩ and inductance of 0.130 µH allow for higher current density than competing technologies, while its 4 mm profile enables slimmer end products. The inductor offers high temperature operation to +155 °C, rated current to 92 A, and handles high transient current spikes without saturation. The device is available in the 10 mm by 10 mm 4040 case size; additional case sizes will be offered in the future.

 

Packaged in a 100 % lead (Pb)-free shielded, composite construction that reduces buzz noise to ultra low levels, the inductor offers high resistance to thermal shock, moisture, and mechanical shock. The IHSR-4040DZ-51 is RoHS-compliant, halogen-free, and Vishay Green.

 

Device Specification Table

Case size

4040

Profile (mm)

4.0

Inductance (µH)

0.130

DCR typ. (mΩ)

0.520

DCR max. (mΩ)

0.546

Heat rating current (A)

72 A

Saturation current (A)

63(1) / 92(2)

SRF typ. (MHz)

151

 

Samples and production quantities of the new inductor are available now, with lead times of 12 weeks for large orders

Comments

Log in or register to post Comment