microcontroller

ROHM's Hybrid Digital Analog Power Supply Reference Design REF67004 is ROHM's New Power Supply Design that Combines Analog and Digital Control

Traditional analog power supplies struggle to keep up with today’s performance and control accuracy requirements, which have gotten way stricter. Even though digital power supplies work better, they’re just too expensive and use too much power for smaller industrial applications. This makes their use limited. To counter this, ROHM has just announced a new reference design for power supply…

Wearable Air Quality Pendant How to build a Wearable Air Quality Monitor Pendant using STM32 & SGP40 Sensor

Indoor and outdoor air pollution significantly impacts human health, causing respiratory issues and reducing life expectancy. Personal air quality monitoring has become essential for protecting ourselves from harmful airborne contaminants like volatile organic compounds (VOCs), particulate matter, and toxic gases. This DIY wearable air quality monitor pendant…

Robot Picks Locks Using Physics, Not Cameras A Robot That Picks Locks Using Physics, Not Sight

In an ambitious experiment, a creator built a robotic lockpicker that can identify internal lock pins without a camera. It relies on force sensing and Hooke’s Law. This improves on previous versions of the project that took a brute-force approach, which cost up to a week trying every possible pin combination.  

The new version uses RC servo motors for quicker movement and mounts…

AutoML Tool Simplifies AI Deployment on Embedded Edge Devices ADI and Antmicro’s AutoML for Embedded Builds AI Models for Edge Hardware

AutoML for Embedded, developed by Analog Devices (ADI) and Antmicro, is available now to help developers easily build, optimize, and deploy AI models on constrained edge hardware. The tool is built into Visual Studio Code as a plugin. It’s part of the Kenning framework. Whether you're working with ADI’s MAX78002 or MAX32690 AI MCUs, or simulating your project using Renode and the Zephyr RTOS,…

CARA: Rope-Driven Robot Dog Without Gears CARA: A Rope-Driven Quadruped Robot Without Gears or Pulleys

Over the past year, Aaed Musa built a robot dog called CARA, short for "Capstans Are Really Awesome". The design does not involve gears or pulleys like traditional ones. CARA uses something called capstan drives that move joints using ropes wrapped around rotating drums. This system has numerous advantages, such as zero backlash, high torque transparency, low inertia, low noise, and low cost…

Mind Link: Open-Source Brain-Computer Interface Mind Link: A DIY Brain-Computer Interface Built from Scratch

Creator, AstroSam, built a functional prototype of a brain-computer interface (BCI), called Mind Link. It reads brain signals from a simulated 32-electrode array and sends them to a computer to visualize right away and possibly process later. The build combines custom PCBs, firmware, and magnetic connectors. The project is open-source and documented from scratch.

The system consists of…

Renesas Unveils RA2T1 MCUs Renesas Launches RA2T1 MCUs for Single-Motor Applications

Renesas Electronics Corporation has launched a new group of microcontrollers (MCUs) named RA2T1, tailored for systems that control a single motor. The group is based on the Arm Cortex-M23 processor, running at 64 MHz, and is meant for devices like fans, power tools, vacuum cleaners, refrigerators, printers, and hair dryers. They have a 3-channel sample and hold (S&H) function to measure…

Cyborg Beetles Navigate Obstacles With Implants Zoborg: Cyborg Darkling Beetles with Elytra and Pronotum Implants

Researchers, with support from The University of Queensland and other institutions, developed Zoborg, a living darkling beetle that was turned into a cyborg using an electronic wireless backpack mounted on its body. The backpack is tiny (15.8 mm x 5.8 mm, weighing 160 mg) and includes an ATtiny85V microcontroller and an infrared receiver. Electrodes are implanted in the elytra (hard covers on…

Real-Life Rideable Transformer Robot Built This Transformer Robot Was Built to Be Ridden, Not Just Looked At

A maker built a real-life transformer robot that switches from a car to a robot, just like in the movies. The build is designed for someone to ride, much like a toy car. The robot uses Gimson Robotics 99.5:1 gearhead motors with additional 3D-printed two-stage gear reductions. Six motor assemblies power all leg joints.

It uses AS5047 magnetic encoders to track joint positions, allowing…

RFID-Based Attendance System Using Arduino RFID Based Attendance System Using Arduino - Complete Project Guide

An RFID-based attendance system transforms the tedious task of manual attendance tracking into an automated, error-free process. What makes this project particularly exciting is how a few inexpensive components can replace expensive commercial systems, giving you complete control over features while learning valuable skills in embedded programming and circuit design…

DIY Piano Doorbell Replaces Classic Chime Sound DIY Piano Doorbell That Replaces the Classic Chime with Musical Notes

A simple piano doorbell that replaces the usual chime with real piano notes was demonstrated in a recent project published by Arpan Mondal. The system combines microcontroller-based control with audio playback to create an interactive doorbell.

At its core is an ESP32-S3, which takes inputs from 5 keys styled like a tiny piano. Each key is built using micro limit switches and connected…

Bharat Electronics And Tata Collaborate On Semiconductors BEL and Tata Electronics Sign MoU to Propel India's Indigenous Semiconductor Ecosystem

Bharat Electronics Ltd(BEL), a Navratna defense public sector enterprise that deals with cutting-edge electronics systems, and Tata Electronics, a Tata Group greenfield venture, signed a Memorandum of Understanding (MoU) on June 5, 2025, at Bombay House, Mumbai. This formalizes their joint efforts to develop indigenous electronics and semiconductor solutions.

The primary aim of the…

Have any questions?