It should measure the temperature from two sensors 1 time per minute, display the temperature value on the "Temperature of 1 sensor" screen with an accuracy of one decimal place "Сelsia", after 5 seconds of the 2nd sensor, write the measurement result to the microSD card to the temp.esv file, in the format MM:HH::DD:YYYY; temperature value with an accuracy of one decimal place in Celsia from the 1st sensor; temperature value with an accuracy of one decimal place in Celsia from the 2nd sensor. ...
Lywyy
PermalinkI'll be grateful for the reply
- Log in or register to post comments
Joined January 06, 2023 1Friday at 06:27 PM