tilt sensor
|
Interfacing Tilt Sensor with Arduino A Tilt Sensor switch is an electronic device that detects the orientation of an object and gives its output High or Low accordingly. Basically, it has a mercury ball inside it which moves and makes the circuit. So tilt sensor can turn on or off the circuit based on the orientation. In this project, we are interfacing Mercury switch / Tilt sensor… |
|
Simple Tilt Sensor Switch Circuit A tilt sensor is a sensor which opens and closes an electrical circuit when it is inclined beyond at certain angle. It can be used in tilt prevention devices, an alarm circuit and in many DIY projects. There are different types of Tilt sensor modules, for sensing the tilt the module can have a ball switch or mercury switch. In this circuit, we are using a Mercury-based tilt… |
|
Anti-Theft Alert System using ATmega8 Microcontroller In this project we are going to make a vibration alert system with ATMEGA8 microcontroller. This can also be used as a theft alert system, for that we are going to interface tilt sensor with ATMEGA8. A tilt sensor is shown in below figure. We can see there is a cylinder in the picture, in that cylinder there will… |
