STM32
|
Getting Started with Arduino UNO Q: Exploring App Lab, AI Agent Mode, and More For many engineers and makers, the journey into electronics and microcontrollers probably started with an Arduino board. From making a simple LED blink to reading sensors, controlling motors, and building our first embedded projects, Arduino has been a familiar starting point for learning and experimenting with electronics. But the… |
|
This DIY Quadcopter Flies on a Homemade STM32 Flight Controller and Remote, No Betaflight Most hobby quadcopters fly on an off-the-shelf flight controller running Betaflight or INAV. Maker tynix5 went the hard way instead. The 5 inch quad, called No Fly Zone, flies on a flight controller PCB that the maker designed and hand-assembled, paired with a handheld remote built on a second custom PCB. All of the flight and remote firmware was written from scratch, and the full write-up,… |
|
How to Build a DIY Digital Oscilloscope using STM32 Microcontroller An oscilloscope is the one instrument every electronics engineer reaches for when a circuit misbehaves. A multimeter tells you a single number, but an oscilloscope shows how a voltage changes over time: the shape of a PWM signal, the bounce of a switch, or the ripple on a sensor output. Bench oscilloscopes are expensive, though, and the best way to understand how one… |
|
This $32 Open-Source PCB Encoder Measures Position to 40 µm Using the Same Trick as Your Digital Calipers Cheap digital calipers hide a clever capacitive encoder inside, and Nick Steele (nichlock) has turned that idea into an open-source linear scale you can build yourself. It is just two PCBs, a sensor board with an STM32L4 and a passive copper "reflector" strip, sliding about 0.1 mm apart. The maker rates it at 40 µm accuracy against a Mitutoyo digital indicator, and the build costs roughly $32… |
| |
This STM32 Turns 3,000 Mechanical Pixels Into a Real-Time Fluid Simulator With Joystick-Controlled Gravity Maker Tim Alex Jacobs has turned nearly 3,000 old electromechanical flip dots into an unusual real-time fluid simulation display. Instead of using an LCD or LED panel, the project uses eight salvaged flip-dot panels, where every pixel is a small magnetic disk that physically flips between two positions. which is black and yellow. The result is a display that not only shows the movement of the… |
|
Maker Builds a 12-DOF ROS 2 Quadruped Using Jetson Orin Nano for Vision and STM32 for Real-Time Control Ashish Agrahari, a Mechatronics Engineering student at the University of Waterloo, has recently built Orion, a 12-DOF quadruped robot dog designed and programmed from scratch over eight months, combining ROS 2 autonomy with custom embedded electronics. The system is split into two layers: a Jetson Orin Nano for high-level perception and planning, and custom STM32-based PCBs for deterministic,… |
|
This STM32 GPS Device Shows Which Planets Are Above You Offline, Fitting 5 Years of Orbits in 64KB What if a tiny electronic device could look at the sky without a camera or telescope and tell you which planets are currently above the horizon? That is the idea behind Whats Up V2, a compact GPS-based circuit built around an STM32G031K8 microcontroller. The device uses a u-blox SAM-M10Q GPS module to obtain its location and precise UTC time, while nine SK6812-EC20 addressable RGB LEDs provide… |
|
Introducing the STM32C5 Series: ST’s Next-Gen Microcontroller Lineup STMicroelectronics has introduced its latest entry-level microcontroller family, the STM32C5 series, aimed at powering the next generation of smart devices across homes, industries, and infrastructure. Built around the Arm Cortex-M33 and manufactured using an advanced 40nm process, the new series delivers a significant boost in performance, memory capacity, and efficiency compared to… |
|
Getting Started with Arduino UNO Q - Beginners Guide From blinking LEDs to building robots, the Arduino UNO was the development board that made electronics feel possible for students, professionals and a lot of hobby makers around the world. While keeping the familiar idea of Arduino UNO and its form factor the same, they have launched this board called the Arduino UNO Q, which is a more capable variant of the original… |
|
The nRF9151 MicroMod Processor The nRF9151 MicroMod Processor is a compact cellular IoT module built around Nordic Semiconductor’s nRF9151 System-in-Package (SiP) and designed to work seamlessly with SparkFun’s MicroMod ecosystem. Using an M.2 E-Key connector, the 22 × 22 mm board plugs directly into compatible MicroMod carrier boards, making it easy to add cellular and positioning capabilities without complex wiring or… |
|
Top 10 Open-Source Robotic Arms For Beginners A robotic arm is one of those classic projects that almost every electronics enthusiast tries at some point. It’s a perfect mix of mechanics, electronics, and hands-on creativity and building one teaches you more than any textbook ever could. When most people think of robotic arms, they picture the big, ultra-precise industrial robotic arm machines found in factories… |
|
Build a Precision Digital Micro Current Meter with STM32 Keeping track of extremely low current levels is often essential when developing or testing low-power devices, especially in the field of embedded systems and battery-operated electronics. For battery-related diagnostics or energy-storage testing, the Building a Lithium Cell Capacity Tester tutorial offers a practical method for measuring cell performance over time.… |