MPU6050
|
Hand Gesture Controlled Robotic Arm using Arduino Nano Robotic Arms are one of the fascinating engineering creations and it is always fascinating to watch these things tilt and pan to get complex things done just like a human arm would. These robotic arms can be commonly found in industries at the assembly line performing intense mechanical work like welding, drilling, painting, etc., recently advanced robotic arms with… |
|
Build a Portable Step Counter using ATtiny85 and MPU6050 In this tutorial, we are going to build an easy and cheap Pedometer using ATtiny85 IC, MPU6050 Accelerometer & Gyroscope, and OLED Display Module. This simple Arduino based step counter is powered by a 3V coin cell, making it easy to carry when you go out for a walk or jog. It also requires very few components to build and the code is also relatively simple. The program… |
|
Arduino Programmable Open-Source Flight Controller and Mini Drone using SMT32 and MPU6050 for Drone Enthusiasts Pictured here is an open-source flight controller and mini drone by Shao's Gadget. YMFC (Your Multicopter Flight Controller) as it is named is a mini drone by itself or a flight controller for a full-size F450 drone that can be programmed with Arduino IDE. The open-source nature and simple design control of YMFC make it apt for the people who are working on some kind of… |
|
MPU6050 Gyro Sensor Interfacing with ESP32 Board The MPU6050 sensor module consists of an accelerometer and gyro on a single chip. It contains analog-16 bits in the digital converter for each channel. So it can capture the x, y, and z channels at the same time. The sensor uses I2C-bus to interact with Arduino or any other microcontroller. The MPU-6050 sensor module used in many applications like drones, robots, motion… |
|
DIY Arduino Digital Protractor using MPU6050 Gyroscope The MPU6050 is an IC 3-axis accelerometer and a 3-axis gyroscope combined into one unit. It also houses a temperature sensor and a DCM to perform a complex task. The MPU6050 is commonly used in building Drone and other remote robots like a self-balancing robot. In this project we will build a Digital Protractor using MPU6050 and Arduino. Here a servo… |
|
MPU6050 Gyro Sensor Interfacing with Raspberry Pi The MPU6050 sensor has many functions over the single chip. It consists a MEMS accelerometer, a MEMS gyro, and temperature sensor. This module is very accurate while converting analog values to digital because it has a 16bit analog to digital converter hardware for each channel. This module is capable to capture x, y and z channel at the same time. It has an I2C… |
|
DIY Arduino Inclinometer using MPU6050 The MPU6050 is an IC 3-axis accelerometer and a 3-axis gyroscope combined into one unit. It also houses a temperature sensor and a DCM to perform a complex task. The MPU6050 is commonly used in building Drone and other remote robots like a self-balancing robot. In this project we will learn how to use the MPU6050 is built an Inclinometer or Spirit Leveller. As we know an… |
|
MPU6050 Gyro Sensor Interfacing with Arduino MPU6050 sensor has many functions over the single chip. It consists a MEMS accelerometer, a MEMS gyro, and temperature sensor. This module is very accurate while converting analog values to digital because it has a 16bit analog to digital converter hardware for each channel. This module is capable to capture x, y and z channel at the same time. It has an I2C interface to… |
