Offline Raspberry Pi 5 Field Computer Runs Wikipedia, Maps, GPS and SDR for 24+ Hours

User Avatar Aswinth Raj
Author
Share
Rugged Raspberry Pi 5 Field Computer Displaying

When the power or the internet goes down, most of the information we rely on goes with it. Reddit user cameron_chill spent several months building a rugged, battery-powered Raspberry Pi 5 computer that keeps it all local: offline Wikipedia, worldwide maps, GPS, a software-defined radio and its own Wi-Fi network, running for more than 24 hours on a single charge.

What is inside the case

The core is a Raspberry Pi 5 with 8 GB of RAM running Debian 13 and booting from a 1 TB NVMe SSD over PCIe Gen 3. Everything is packed into a rugged equipment case with a 10.1-inch touchscreen in the lid. Power comes from a 12.8 V, 20 Ah LiFePO4 battery (256 Wh) through a 5 V buck converter and fused distribution, with external charging and USB-C PD ports. An RTL-SDR Blog V4 receiver and an ATGM336H GPS module each have an external antenna connection, a second USB Wi-Fi adapter joins existing networks, and temperature-controlled fans handle cooling. Nearly all of the internal mounting, including the screen bezel, is custom 3D-printed.

What it runs

About 124 GB of English Wikipedia is stored locally through Kiwix, alongside roughly 139 GB of vector map data shown in a local MapLibre interface. The GPS feeds the map with the current location, and its PPS output is wired to the Pi so chrony keeps satellite-synchronised time without an internet time server. A browser-based SDR front end offers tuning, several analog modes, a spectrum and waterfall display, audio streaming and recording, tested on NOAA weather radio and aviation bands. There is also a small video library, a local message board and a web dashboard tying it together. The Pi broadcasts its own Wi-Fi network, so phones and laptops can use every service from a browser, and mDNS makes it findable by name on other networks.

Power numbers and one neat fix

With the screen on and the SDR receiving weather radio, the system drew about 8.7 W and ran past 24 hours in an endurance test. With the screen switched off it drops to about 6.5 W, a theoretical 39 hours that has not yet been fully tested. One clever detail is the touchscreen: its physical buttons would have been hidden inside the case, so the maker replaced them with five TTP223 capacitive touch sensors behind the 3D-printed bezel, each driving a MOSFET that simulates a button press through the plastic.

Our take

The maker estimates the parts at around $600 to $1,000. What makes this build worth studying is the system design rather than any single part: real power budgeting, GPS-disciplined time and a local network that turns one Pi into a shared offline server. If you want to start with the GPS piece, see our GPS module interfacing project with Raspberry Pi.

Image credit: cameron_chill on Reddit, cropped and resized.

About the author: Aswinth Raj is an electronics engineer and the editor of CircuitDigest, where he has published more than 150 hands-on projects and tutorials across Arduino, PIC, ESP32, Raspberry Pi and EV battery systems. He selects the stories on this page for what engineers and makers can actually learn or build from. Connect on LinkedIn

Have any question related to this Article?

Add a comment

No account needed. Your comment appears once a moderator has reviewed it.

Never shown publicly.
CAPTCHA
This question is for testing whether or not you are a human visitor and to prevent automated spam submissions.