fpv
|
Seven Resistors and an ESP32-C5: This Open-Source FPV Receiver Uses the Wi-Fi Radio to Catch Analog Drone Video Analog FPV goggles normally need a dedicated 5.8 GHz receiver module, but Leon (Twotoz) has built one out of a Seeed Studio XIAO ESP32-C5 and seven resistors. His open-source C5VRX-5 firmware uses the ESP32-C5's own dual-band Wi-Fi radio to pick up the FM video from a drone's analog VTX, demodulates it, and pushes composite PAL or NTSC video out of six GPIO pins into your goggles, a DVR or a… |
|
No PC, No Cables: This Raspberry Pi 4 Beams an FPV Drone Sim Straight Into Your Analog Goggles Developer juricabi has built StickTime Pi, an open-source project that turns a Raspberry Pi 4 into a "virtual quad". The Pi runs the StickTime FPV simulator and pushes the picture through a 5.8 GHz video transmitter (VTX) wired to its AV jack, so the game shows up in the same analog goggles you use for real flights. You fly it with your own radio over the ExpressLRS/Crossfire WiFi joystick,… |
