12V to 24V Medical and Industrial Certified AC-DC Power Supplies with Peak Capability of 400W

Published  May 12, 2020   0
CUS400M AC-DC Power Supply

The TDK-corporation introduced the CUS400M medical and industrial certified AC-DC power supplies with 12V and 24V outputs in the industry standard 3 x 5 footprint. With forced air, the new devices can deliver 400W power and it can supply 250W when convection cooled with a peak capability of up to 400W. The duration period of that peak is up to 30 minutes (40°C ambient, 230Vac input) with a maximum duty cycle of 50%, which is considerably longer than the other similar products in the market.

All the models in the series accept an 85 to 264Vac input and have a no-load power consumption of less than 1.3W when the output is inhibited. The users can leverage a 5V 2A or 12V 1A standby voltage, remote on/off, remote sense, AC fails and an output good signal if required. The series has a choice of mechanical configurations and is available in Open frame, baseplate, U-channel, and enclosed versions.

The input to output isolation of the CUS400M is 4,000Vac (2 x MoPP), whereas the input to ground isolation is 1,500Vac (1 x MoPP) and an output to ground isolation is 1,500Vac (1 x MoPP), hence they are suitable to be used in B and BF rated medical equipment. The leakage current is <250µA and the touch current is <100µA.

The bottom of the CUS400M circuit board is inserted into a thermally conductive insulated plastic base so that the heat from the surface-mounted power components can be dissipated into the cold plate or the chassis. The overall size of the open frame model is 77.5mm x 128mm x 39.5mm (W x L x H). The maximum operating, transportation, and storage altitude of the CUS400M is 5,000m. The CUS400M is best suitable for applications with a relatively low quiescent power consumption and occasional peak demand, including hospital beds, dental chairs, and incubators.

Add New Comment

Login to Comment Sign in with Google Log in with Facebook Sign in with GitHub