Open collector explanation

An open collector is a common type of output found on many integrated circuits (IC), which behaves like a switch that is either connected to ground or disconnected.

This is entirely internal circuitry with the XOR.

Don't worry you can choose any standard XOR, that is available in spice and could make the simulation.

An open collector is a common type of output found on many integrated circuits (IC), which behaves like a switch that is either connected to ground or disconnected.The emitter of the transistor is connected internally to the ground pin.

An open collector is a common type of output found on many integrated circuits (IC), which behaves like a switch that is either connected to ground or disconnected. Instead of outputting a signal of a specific voltage or current, the output signal is applied to the base of an internal NPN transistor whose collector is externalized (open) on a pin of the IC. The emitter of the transistor is connected internally to the ground pin. If the output device is a MOSFET the output is called open drain and it functions in a similar way. For example, the I²C bus is based on this concept.

An open-collector output is used to connect one side of the device being controlled to ground. The other side of the device will be connected to power.You connect the positive side of your device to the 5v connection and the negative side to a drive output.

An open-collector output is used to connect one side of the device being controlled to ground. The other side of the device will be connected to power. If you look at the CRICKIT "drive" outputs you will see that this is exactly what they are.An open collector is a common type of output found on many integrated circuits which behaves like a switch that is either connected to ground or disconnected. Instead of outputting a signal of a specific voltage or current, the output signal is applied to the base of an internal NPN transistor whose collector is externalized on a pin of the IC.