Mobile Control Car with ESP32CAM

MOBILE CONTROL CAR with esp32cam for inspection which is used to inspect and it's helpful in one or many places.

Components Required

• 4WD car kit

• Arduino Uno r4 WIFI

• Esp32cam module

• L298N motor driver

• Lithium Ion battery ×4

• Charger for battery

1. I will make 2 applications for this project one for controlling Arduino r4 and second to view esp32cam

2. Application I make with help of mit app inverter codeless application can make easily here

3. Arduino connect with first app code that way that app give caracter like R or L arduino understand R for right like giving both left side motors power and right-side motors get back ward so turn smooth

4. This project can used for inspection in various like in honeybee taming it good for that

5. Lithium-ion battery is used here because it is eco-friendly rechargeable batteries

6. Arduino r4 is used because it has Bluetooth and WIFI capabilities with higher speed

7. More improvement done while making this project

8. I found this project interesting as it software part will made in mit app Inverter and I will give full block code for application and how I connect it with Arduino r4

Now the project is started

I am happy that I got Arduino r4 And I am excited to do project with it. I purchased all components required and almost created app now just connect and code is required first I am checking Arduino r4 with simple code and it's work properly now I just want to upload 1 part of code to control car only so I just going to upload and there was multiple library error one by one I solve all and then I start uploading and error showing that no any device connected but it's automatically detects Arduino Uno R4 I tried multiple times with Changing cables but it didn't work then I noticed that Arduino r4 heats too much so I disconnected with laptop and then after 2 to 3 days but it didn't work so I started project with esp32 but by doing this my laptop and esp32 suddenly off and not turning on before it off I tried with esp32 cam and same esp32 cam was turn of but not my laptop I think my laptop give over current and I am really sorry that I couldn't complete my project but I give my best for this project and I really disappointed but that is what I can and I try to explain it in video so ..... Thank you for this support