Arduino Weight Measurement using Load Cell and HX711 Module | Circuit Digest

Dear Sir,

Refer to the below artical:

https://circuitdigest.com/microcontroller-projects/arduino-weight-measu…

If i would like to measure 200 kg. Can i use back the code and just change the load cell to 200 kg?

Thanks

Sebastian Lim

Log in or register to post comments

	ACS37220 magnetic current sensors Magnetic current sensors are a compelling alternative to traditional shunt-based solutions
	XtremeSense™ TMR technology Highest magnetic sensitivity, lowest power consumption, smaller size compared to Hall, AMR, and GMR
	PCAL97xx High-Performance GPIO Expanders 22-bit and 14-bit GPIO expanders with SPI interface and integrated voltage level translators
	InnoSwitch™3-EP family InnoSwitch™3-EP family of offline CV/CC QR flyback switcher ICs feature 900 V PowiGaN™ GaN switches.
	DigiKey's Edge AI Explore the latest edge devices and development tools on DigiKey's Edge AI page.
	STM32MP25 Second-Generation Application Processors AI-Powered STM32MP2 MPUs in Single or Dual 64-bit Arm® C-A35 TZ core @ 1.5GHz
	CertusPro™-NX FPGA Versa Board CertusPro™-NX FPGA Versa Board: Platform for rapid prototyping and testing of specific designs
	ACS37220 Current Sensors The ACS37220 is used to replace shunt resistors for a smaller footprint and simple integration.