sx1262 raspberry node connect to the things network through a gateway

Hi,

I have a sx1262 lora model and a raspberry pi 3 and want to connect it to the things network through a gateway to receive the rssi of the lora network.

I cannot find any help online regarding connecting sx1262 to ttn. can you help me with my project? thanks in advance

Sourav Gupta

Permalink

Am not sure whether it can.

Am not sure whether it can. But Onethinx module uses the same sx1262 and it connects with ttn. Kindly check that if you find out some informations regarding this.

Thanks.

Joined February 12, 2018 696
Monday at 02:11 PM

	ACS37220 magnetic current sensors Magnetic current sensors are a compelling alternative to traditional shunt-based solutions
	XtremeSense™ TMR technology Highest magnetic sensitivity, lowest power consumption, smaller size compared to Hall, AMR, and GMR
	PCAL97xx High-Performance GPIO Expanders 22-bit and 14-bit GPIO expanders with SPI interface and integrated voltage level translators
	InnoSwitch™3-EP family InnoSwitch™3-EP family of offline CV/CC QR flyback switcher ICs feature 900 V PowiGaN™ GaN switches.
	DigiKey's Edge AI Explore the latest edge devices and development tools on DigiKey's Edge AI page.
	STM32MP25 Second-Generation Application Processors AI-Powered STM32MP2 MPUs in Single or Dual 64-bit Arm® C-A35 TZ core @ 1.5GHz
	CertusPro™-NX FPGA Versa Board CertusPro™-NX FPGA Versa Board: Platform for rapid prototyping and testing of specific designs
	ACS37220 Current Sensors The ACS37220 is used to replace shunt resistors for a smaller footprint and simple integration.