Resistor Value

Nayef's picture

Offline

Joined: Apr 17, 2020

Replies: 1
Resistor Value
April 17, 2020 - 7:28pm

Could anyone please help me identify the value (Ohms) of this resistor?

Colors ( Yellow, Violet, Sliver, Black )

Sourav Gupta's picture

Offline

Joined: Feb 12, 2018

Replies: 271
Are you sure last color is Black?
April 18, 2020 - 11:31am

If the resistor value is Yellow, Violet, Sliver, Black - it is 0.47 Ohms, not sure about the tolarence. If it is dark Brown then it is 1%.

Use resisotor color code calculator from circuit digest for ease of resistor value fidings.

https://circuitdigest.com/calculators/resistor-color-code-calculator

Nayef's picture

Offline

Joined: Apr 17, 2020

Replies: 1
Thank you very much, your
April 18, 2020 - 12:45pm

Thank you very much, your response was great help

jaksonlee's picture

Offline

Joined: Nov 07, 2019

Replies: 122
A resistor is a device that
April 19, 2020 - 1:57pm

A resistor is a device that opposes the flow of electrical current. The bigger the value of a resistor the more it opposes the current flow. The value of a resistor is given in ohms and is often referred to as its 'resistance.

A resistor is a passive two-terminal electrical component that implements electrical resistance as a circuit element. In electronic circuits, resistors are used to reduce current flow, adjust signal levels, to divide voltages, bias active elements, and terminate transmission lines, among other uses. High-power resistors that can dissipate many watts of electrical power as heat, may be used as part of motor controls, in power distribution systems, or as test loads for generators.
The electrical function of a resistor is specified by its resistance: common commercial resistors are manufactured over a range of more than nine orders of magnitude. The nominal value of the resistance falls within the manufacturing tolerance, indicated on the component.

Technical Shahzad's picture

Offline

Joined: May 23, 2020

Replies: 48
Resistor Value Calculation Formula
May 31, 2020 - 8:43am

For checking resistance of a specific resistor you have, there are several ways to do that. You can use a digital multi-meter in ohm mode, by using which you can check the resistance value of any resistor. Other method is using a platform application or electronics tools mobile app, you can check the resistance by selecting No. of bands of resistor and colors of bands. And the last and interesting way is you just use this sentence for accessing color codes

"B B R O Y Goes Britain Via Germany West ;)"

 B Black

 B Brown

 R Red

 O Orange

 Y Yellow

 Goes Green

 Britin Blue

 Via Violet

 Germany Gray

 West White

I hope this will help you. I would like to recommend you to get connect with the Sierra Software Ltd. platform technical support team for getting better assistance regarding your queries and project online support.