Conductive glue

TheYikes's picture

Offline

Joined: Mar 03, 2020

Replies: 0
Conductive glue
March 3, 2020 - 1:29am

Hi. I'm a complete novice so please don't slate me for asking this question.
I was just wondering if there is such a thing as quick drying conductive glue or adhesive?

Sourav Gupta's picture

Offline

Joined: Feb 12, 2018

Replies: 281
Conductive glue
March 3, 2020 - 10:43am

Yes, there are conductive glues or adhesive available for the use of electronics.

Those adhesive and glues are mainly call as ECAs.

Debasis Parida's picture

Offline

Joined: Aug 22, 2019

Replies: 124
Yes.there are several adhesives available
March 3, 2020 - 11:31am

There several conductive adhesives available in the market.You can opt for Electrically Conductive Epoxy, Silver Adhesive glue in several online shopping sites.

marry roser's picture

Offline

Joined: Nov 21, 2019

Replies: 35
An electrically conductive
March 9, 2020 - 11:00am

An electrically conductive adhesive is a glue that is primarily used for electronics. The electric conductivity is caused by a component that makes ca. 80% of the total mass of an electrically conductive adhesive

jaksonlee's picture

Offline

Joined: Nov 07, 2019

Replies: 122
The electric conductivity is
March 11, 2020 - 12:14pm

The electric conductivity is caused by a component that makes ca. 80% of the total mass of an electrically conductive adhesive. This conductive component is suspended in a sticky component that holds the electrically conductive adhesive together. The particles of the conductive component are in contact to each other and in this way make electric current possible.

Technical Shahzad's picture

Offline

Joined: May 23, 2020

Replies: 48
Conductivity Control with Materials
May 31, 2020 - 8:32am

Hi TheYikes! There are a lot of conductive inks, adhesives, paints available in the market containing silver adhesives, graphite elements etc. One of my experience with conductivity control and conductive paint/inks, I tried a few years back to make my own conductive ink/paint to create schematics on paper/plastic. The first try I made using graphite powder and for sticking purpose, used adhesive glue commonly known as gamin glue. This works fine but there is an issue with this is that it has high value of resistance because of the graphite. But after that got idea from my department teachers to use some kind of nitrates of silver like AgNO3 which has low resistance as compared to the graphite. You can use this method to make your own of get it from market. Here I would like to suggest you to get connect with the Sierra Software Ltd. platform technical support team for getting better assistance regarding your queries and project support.