Music operated dancing LED's

This circuit is working above certain frequency but what to do if I want to set upper frequency too simultaneously in same circuit? Please reply fast

Joined August 16, 2016 1000

Tuesday at 12:29 AM

Hi Grae,

If you want the LED's to respond to a different set of frequencies you can change the value of R-C filter or HIGH PASS filter (R2 and C1)

No account needed. Your comment appears once a moderator has reviewed it.

Or sign in with

DigiKey featured products logo

	NPS7601 Compact, Low-IQ Load Switch The Nexperia NPS7601 is a compact, single-channel, regulated forward-drop load switch
	TFOS Series Automotive-Grade 260 W Resistor Power up your design with Bourns® TFOS
	NFC FPC Antennas NFC FPC antennas offer a compact and versatile family of antennas for two-way read/write operations
	NSP/RSP Series High-Efficiency Enclosed AC/DC Power Supplies NSP series power supplies deliver 75W–3200W high-efficiency power for industrial systems.
	PIC32CM GV Low-Power 32-bit Microcontrollers for Embedded Control Boost performance and efficiency with PIC32CM GV 32-bit MCU—ideal for secure, low-power designs.
	Johanson Technology Multi-Layer High-Q SMD Capacitors Watch a quick overview of High-Q capacitor key specs and benefits for RF and microwave designs
	HPF3K0 Series AC/DC Power Supplies Digital 3kW AC-DC with 0-110% programmable 24V-60V outputs and ITE/medical safety approvals
	DuraClik 2.00 mm Wire-to-Board Connector System Providing compact, secure connections for high-vibration use, excelling in harsh conditions

Join 100K+ Subscribers