Arduino mp3

Submitted by Nishanth on Wed, 11/01/2017 - 22:53

Hai,I made this mp3 using Arduino it is good and thanks.Now I would like to make this one with toggle switch means once switch "ON " that means input "LOW" keep it like that must be work.But now it is not working if switch OFF it is working . please give suggestions
Thanks

Hi Nishanth,

There are two types of switches NC (normally Closed) and Normally Open (NO). You must have been using a NC type, change to NO or bice versa and it should work as per your expectation

  Joined August 16, 2016      997
Tuesday at 12:29 AM