Hi! How do I stop the servo from turning when it reaches a certain force exerted on the fsr 402 force sensor on the raspberry pi 3?
Tower Pro - SG90
Tower Pro - SG90
Specifications:
- Operating Voltage: 3.0 - 7.2V
- Rotation angle: 180 degrees
- Speed: 0.12 sec / 60 Degree (4.8V) without load
- Torque: 1.2 kg.cm (4.8V) and 1.6 kg.cm (6.0V)
- Operating Temperature: -30C ~ + 60C
- Gear Type: Nylon
- Cable size: 245mm
- Dimensions: 32 x 30 x 12mm
- Weight: 9g
Stop sending data when the
Stop sending data when the servo reach to a certain level. try to use servo write microseconds function rather than servo write.
Sourav Gupta
PermalinkWhat is the driver ic and servo spec or part number?
- Log in or register to post comments
Joined February 12, 2018 696Monday at 02:11 PM