Change your cover photo
Upload
manthandomde@gmail.com
Change your cover photo
My name is Manthan Domde, currently I am pursuing degree in b.tech and my specialization in electronic & telecommunication. I am hard-working and isn't afraid to face a challenge.
This user account status is Approved

This user has not added any information to their profile yet.

heart rate and spo2 monitoring system
Arduino UNO R4 WiFi

After the COVID-19 pandemic, monitoring the heart rate and SpO2 levels have become critical in healthcare. However, due to the lack of adequate supplies, a majority of people, especially in rural areas, do not have access to these measurement kits. This IoT project will help you make a measuring kit with a few simple tools.
Measurement of heart rate and SpO2 is done by pulse oximetry method using sensor module and Raspberry Pi. The Arduino-based sensor module collects, calculates and sends heart rate and SpO2 data to Raspberry Pi for further analysis based on normal value reference table to detect abnormalities.
A pulse oximeter measures your blood oxygen levels and pulse. A low level of oxygen saturation may occur if you have certain health conditions. Your skin tone may also affect your reading. Pulse oximetry is a noninvasive test that measures the oxygen saturation level of your blood.

Technical Requirements

Arduino UNO
1 Pulse oximeter
Buzzer
Adafruit OLED Display
Hooking wires
Power supply