I have an outdoor strip light from Wide Loyal (120V power supply, 12V circuit, ~11.0W) that I want to put on a conditional timer. Conditions are as follows:
-Indoor light switch turns on and off light
-Proximity switch at gate for when the gate opens, it turns the light on for 2 minutes even if the indoor light switch is off
-Motion sensor at front door (around the corner from where the gate is) that turns on the light for 2 minutes even if the indoor light switch is off
-Circuit will be outdoor subject to -40°C to +40°C temperatures in a moisture proof box
I have seen timer relay boards online, but I want something where I didn't need a seperate 12V supply. Is there such a thing? Forgive me if this request sounds dumb, I am very new to circuit design, but am looking to learn.
Thanks in advance for all of your help!!
Nick
Aswinth Raj
PermalinkHi Nick,
I can see two options here, one buy a timer relay module and connect it with your light. this relay will work directly from 110V/220V AC and will be very compact an example would be DT600 (SELEC). You can see how it woks here
https://www.youtube.com/watch?v=YZrKieRo-xE
OR another cheap way would be to buy an external AC/DC converter and relay module and use with a controller like arduino. The former will be expensive but very reliable
And no the question was not dumb.
- Log in or register to post comments
Joined August 16, 2016 1000Tuesday at 12:29 AM